EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Aqueous and Non‐Aqueous Synthesis of 2‐(Dimethylamino)ethyl Methacrylate (Co)Polymers by Solution Radical Polymerization: Modeling and Experimental Study

Opeyemi J. Ajogbeje, Mohammad Pishnamazi, Igor Lacík, Robin A. Hutchinson

Macromolecular Reaction Engineering · 2025-06 · 19 (3)

DOI: 10.1002/mren.202400053 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Reaction Engineering, online erschienen am 07.02.2025. Verfasst von Opeyemi J. Ajogbeje und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The radical polymerization kinetics of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) is explored in dimethyl sulfoxide, ethanol (EtOH), ethanol‐water (EtOH/H 2 O), and water. In situ nuclear magnetic resonance (NMR) spectroscopy is used to study both solvolysis and polymerization kinetics. Hydrolysis of nonionized DMAEMA occurs in H 2 O and ethanolysis in EtOH/H 2 O mixtures to form both methacrylic acid (MAA) and ethyl methacrylate (EMA), with the presence of water increasing the rate of ethanolysis in the mixed solvent. Although some solvolysis occurred in EtOH and EtOH/H 2 O containing 25 wt.% H 2 O, the rates are sufficiently low that essentially poly(DMAEMA) homopolymer is synthesized, unlike the DMAEMA/MAA copolymer formed in water and the DMAEMA/MAA/EMA terpolymer formed in water‐rich EtOH/H 2 O. A model is constructed to represent the polymerization of nonionized DMAEMA in solution, with the experimental results used to estimate key rate coefficients. The model predictions show good agreement with the experimental data on monomer conversion, average molar masses, and molar mass distributions. Similarly, the rate coefficients for polymerization of ionized DMAEMA are estimated based on experiments conducted in water at pH 1 and 4. The understanding gained from these studies is combined into a comprehensive mechanistic model to describe the polymerization of partially‐ionized DMAEMA in the presence of hydrolysis.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Ajogbeje, O. J., Pishnamazi, M., Lacík, I., & Hutchinson, R. A. (2025). Aqueous and Non‐Aqueous Synthesis of 2‐(Dimethylamino)ethyl Methacrylate (Co)Polymers by Solution Radical Polymerization: Modeling and Experimental Study. Macromolecular Reaction Engineering, 19(3). https://doi.org/10.1002/mren.202400053

Vancouver

Ajogbeje OJ, Pishnamazi M, Lacík I, Hutchinson RA. Aqueous and Non‐Aqueous Synthesis of 2‐(Dimethylamino)ethyl Methacrylate (Co)Polymers by Solution Radical Polymerization: Modeling and Experimental Study. Macromolecular Reaction Engineering. 2025;19(3). doi:10.1002/mren.202400053

BibTeX
@article{Ajogbeje2025,
  author = {Ajogbeje, Opeyemi J. and Pishnamazi, Mohammad and Lacík, Igor and Hutchinson, Robin A.},
  title = {Aqueous and Non‐Aqueous Synthesis of 2‐(Dimethylamino)ethyl Methacrylate (Co)Polymers by Solution Radical Polymerization: Modeling and Experimental Study},
  journal = {Macromolecular Reaction Engineering},
  year = {2025},
  volume = {19},
  number = {3},
  doi = {10.1002/mren.202400053}
}
Kostenlos starten →