EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Polymer Versus Polymerization Fouling: Basic Deposition Mechanisms During Emulsion Polymerization by the Example of a Vinyl Acetate and Versa 10 Copolymer

Annika Klinkert, Zoe Friedrich, Elisabeth Glatt, Wolfgang Augustin, Stephan Scholl

Macromolecular Reaction Engineering · 2024-06 · 18 (3)

DOI: 10.1002/mren.202300057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Reaction Engineering, online erschienen am 18.01.2024. Verfasst von Annika Klinkert und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Bundesministerium für Wirtschaft und Energie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The deposition process during emulsion polymerization can be classified as both particulate and reaction fouling, but a deeper understanding of the deposition mechanism, especially in combination with the polymerization process, is lacking. Here, a more in‐depth understanding of the deposition mechanism is sought by investigating the fouling formation of a Vinyl acetate and Versa 10 copolymer on a heated stainless steel surface during emulsion polymerization. Its deposition behavior is also compared with the behavior of an already reacted polymer. All possible influencing factors are investigated separately, and the fouling is quantified by the mass based fouling resistance and the fouling layer composition. The fouling rates of both experimental approaches (ongoing reaction versus already reacted polymer) are used to determine the fraction of reaction fouling along the reaction pathway. The solids content and the driving temperature difference are identified as the main factors influencing fouling formation. The deposited material is composed of latex particles and emulsifier with particle size and number depending on the respective equilibrium composition of the fluid phase. The reaction fouling rate is correlated with the proportion of free initiator radicals and the amount of dissolved monomer in the aqueous phase.

Förderung

  • Bundesministerium für Wirtschaft und Energie

Zitieren

APA

Klinkert, A., Friedrich, Z., Glatt, E., Augustin, W., & Scholl, S. (2024). Polymer Versus Polymerization Fouling: Basic Deposition Mechanisms During Emulsion Polymerization by the Example of a Vinyl Acetate and Versa 10 Copolymer. Macromolecular Reaction Engineering, 18(3). https://doi.org/10.1002/mren.202300057

Vancouver

Klinkert A, Friedrich Z, Glatt E, Augustin W, Scholl S. Polymer Versus Polymerization Fouling: Basic Deposition Mechanisms During Emulsion Polymerization by the Example of a Vinyl Acetate and Versa 10 Copolymer. Macromolecular Reaction Engineering. 2024;18(3). doi:10.1002/mren.202300057

BibTeX
@article{Klinkert2024,
  author = {Klinkert, Annika and Friedrich, Zoe and Glatt, Elisabeth and Augustin, Wolfgang and Scholl, Stephan},
  title = {Polymer Versus Polymerization Fouling: Basic Deposition Mechanisms During Emulsion Polymerization by the Example of a Vinyl Acetate and Versa 10 Copolymer},
  journal = {Macromolecular Reaction Engineering},
  year = {2024},
  volume = {18},
  number = {3},
  doi = {10.1002/mren.202300057}
}
Kostenlos starten →