Influence of nickel and molybdenum disulfide additives on the microstructure and tribological performance of FeCrMoCB amorphous coatings fabricated by laser cladding
Materialwissenschaft und Werkstofftechnik · 14.11.2026
DOI: 10.1002/mawe.70190 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materialwissenschaft und Werkstofftechnik, online erschienen am 14.11.2026. Verfasst von M. F. Saharudin und 5 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.
Abstract (Originalsprache)
The longevity and performance of industrial components are frequently compromised by surface wear, especially in high‐stress applications. This study explores the enhancement of Fe‐based coatings through the incorporation of nickel (Ni) and molybdenum disulfide (MoS 2 ) as alloying elements in nanoparticles size, utilizing laser cladding techniques. Nickel and molybdenum disulfide each independently improve coating performance by refining microstructures, enhancing toughness, and providing solid lubrication, respectively. The modified coatings were thoroughly assessed in terms of their microstructure, hardness, as well as resistance to wear. Coatings samples with 4 wt.% nickel (S2) and 4 wt.% molybdenum disulfide (S3) demonstrated significant improvements, including a 62.5 % reduction in wear volume loss and a 43.2 % decrease in the coefficient of friction compared to unmodified coatings. These findings highlight the potential of nickel and molybdenum disulfide additives in developing high‐performance coatings for demanding industrial environments.
Zitieren
APA
Saharudin, M. F., Zulkifli, N. W. M., Goh, Y., Ibrahim, M. Z., Morina, A., & Mehtab, R. (2026). Influence of nickel and molybdenum disulfide additives on the microstructure and tribological performance of FeCrMoCB amorphous coatings fabricated by laser cladding. Materialwissenschaft und Werkstofftechnik. https://doi.org/10.1002/mawe.70190
Vancouver
Saharudin MF, Zulkifli NWM, Goh Y, Ibrahim MZ, Morina A, Mehtab R. Influence of nickel and molybdenum disulfide additives on the microstructure and tribological performance of FeCrMoCB amorphous coatings fabricated by laser cladding. Materialwissenschaft und Werkstofftechnik. 2026. doi:10.1002/mawe.70190
BibTeX
@article{Saharudin2026,
author = {Saharudin, M. F. and Zulkifli, N. W. M. and Goh, Y. and Ibrahim, M. Z. and Morina, A. and Mehtab, R.},
title = {Influence of nickel and molybdenum disulfide additives on the microstructure and tribological performance of FeCrMoCB amorphous coatings fabricated by laser cladding},
journal = {Materialwissenschaft und Werkstofftechnik},
year = {2026},
doi = {10.1002/mawe.70190}
}
EUVIMED