Porous polymeric nanocomposites for biomedical applications
Materialwissenschaft und Werkstofftechnik · 14.11.2026
DOI: 10.1002/mawe.70186 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materialwissenschaft und Werkstofftechnik, online erschienen am 14.11.2026. Verfasst von S. A. Bello und 14 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben.
Abstract (Originalsprache)
Date seed, and bullock pod nanoparticles with up to 1 wt.% were used as reinforcement in polypropylene to develop biomedical materials. Microstructural, mechanical and antimicrobial tests were conducted. The maximum compressive strength recorded was 29.535 MPa ± 3.83 MPa at 0.2 wt.% date seed nanoparticle addition to the polypropylene matrix. This implies a 78 % increase. Comparison of properties of the polypropylene nanocomposites with bovine tibia trabecular bone show that compressive strength values of 0.6 wt.% bullock pod reinforced polypropylene (27.403 MPa ± 1.02 MPa), 0.2 wt.% date seed reinforced polypropylene (29.535 MPa ± 3.83 MPa), and 0.4 wt.% hybrid particle reinforced polypropylene (26.129 MPa ± 1.63 MPa), are greater than the 17.5 MPa ± 3.2 MPa of bovine tibia trabecular bone. The flexural strength of polypropylene reinforced with 0.6 wt.% bullock pod was 21.706 ± 2.03 MPa, exceeding the value of 18.7 MPa reported for bovine tibial trabecular bone. In contrast, the polypropylene composite reinforced with 0.2 wt.% date seed exhibited a lower flexural strength of 14.13 MPa ± 1.14 MPa. Furthermore, antimicrobial examinations indicated that date seed, bullock pod, and the 0.6 wt.% bullock pod‐reinforced polypropylene composite contain phytochemicals with potential antimicrobial properties.
Zitieren
APA
Bello, S. A., Adebayo, M. K., Kolawole, M. Y., Kolawole, F. O., Ajet‐Peters, D. A., Olowookere, A. O., Abubakar, S. D., Adigun, Z. D., Sulayman, M. O., Balogun, S. W., Daudu, S. D., Akintola, A. M., Jimoh, A. B., Ajao, K. A., & Gabriel, J. (2026). Porous polymeric nanocomposites for biomedical applications. Materialwissenschaft und Werkstofftechnik. https://doi.org/10.1002/mawe.70186
Vancouver
Bello SA, Adebayo MK, Kolawole MY, Kolawole FO, Ajet‐Peters DA, Olowookere AO, et al. Porous polymeric nanocomposites for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2026. doi:10.1002/mawe.70186
BibTeX
@article{Bello2026,
author = {Bello, S. A. and Adebayo, M. K. and Kolawole, M. Y. and Kolawole, F. O. and Ajet‐Peters, D. A. and Olowookere, A. O. and Abubakar, S. D. and Adigun, Z. D. and Sulayman, M. O. and Balogun, S. W. and Daudu, S. D. and Akintola, A. M. and Jimoh, A. B. and Ajao, K. A. and Gabriel, J.},
title = {Porous polymeric nanocomposites for biomedical applications},
journal = {Materialwissenschaft und Werkstofftechnik},
year = {2026},
doi = {10.1002/mawe.70186}
}
EUVIMED