EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of mesh orientation, Arbitrary‐Lagrangian‐Eulerian remeshing and mass scaling in 3D finite‐element modeling of thread‐forming screw connections

T. Binder, P. Reining, M. Klein, M. Oechsner

Materialwissenschaft und Werkstofftechnik · 2026-07 · 57 (7) · 672-686

DOI: 10.1002/mawe.70153 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materialwissenschaft und Werkstofftechnik, online erschienen am 15.07.2026. Verfasst von T. Binder und 3 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic deformation occurring in the forming process during the assembly of thread‐forming screw connections presents a significant challenge for accurate representation in finite element simulations. Among other parameters, the quality of results is largely influenced by the mesh design. With the intention of considering different meshing strategies of the nut component, this study examines the influence of mesh orientation, both straight and parallel to the thread helix, the mesh density, as well as the impact of mass scaling and Arbitrary‐Lagrangian‐Eulerian (ALE) adaptive remeshing operations. The quality of the results obtained was assessed by energy evaluations. Moreover, the size of the nut segment was investigated, revealing that a segment shaped by an angle of 45° around the longitudinal axis is sufficient to accurately represent the forming process and produces similar geometric formations compared to a 360° model. Improvements in results were further achieved by using Arbitrary‐Lagrangian‐Eulerian remeshing operations and a locally refined mesh. Applying mass scaling on highly deformed parts has a large effect on reducing calculation time, simultaneously enlarging element density, which can lead to minor deformation of the nut thread.

Zitieren

APA

Binder, T., Reining, P., Klein, M., & Oechsner, M. (2026). Assessment of mesh orientation, Arbitrary‐Lagrangian‐Eulerian remeshing and mass scaling in 3D finite‐element modeling of thread‐forming screw connections. Materialwissenschaft und Werkstofftechnik, 57(7), 672-686. https://doi.org/10.1002/mawe.70153

Vancouver

Binder T, Reining P, Klein M, Oechsner M. Assessment of mesh orientation, Arbitrary‐Lagrangian‐Eulerian remeshing and mass scaling in 3D finite‐element modeling of thread‐forming screw connections. Materialwissenschaft und Werkstofftechnik. 2026;57(7):672-686. doi:10.1002/mawe.70153

BibTeX
@article{Binder2026,
  author = {Binder, T. and Reining, P. and Klein, M. and Oechsner, M.},
  title = {Assessment of mesh orientation, Arbitrary‐Lagrangian‐Eulerian remeshing and mass scaling in 3D finite‐element modeling of thread‐forming screw connections},
  journal = {Materialwissenschaft und Werkstofftechnik},
  year = {2026},
  volume = {57},
  number = {7},
  pages = {672--686},
  doi = {10.1002/mawe.70153}
}
Kostenlos starten →