EUVIMEDEUVIMED entdecken
Crossref

Optimizing tribological process parameters in hybrid metal matrix composites using the Box‐Behnken method

D. Chauhan, M. Sahni, V. Badheka, K. Mehta

Materialwissenschaft und Werkstofftechnik · 2026-02 · 57 (2) · 124-133

DOI: 10.1002/mawe.70089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materialwissenschaft und Werkstofftechnik, online erschienen am 19.03.2026. Verfasst von D. Chauhan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on optimizing tribological process parameters for hybrid metal matrix composites (HMMCs) using the Box‐Behnken method in a response surface methodology (RSM). The hybrid metal matrix composites were fabricated with aluminium alloy 6061 as the base material, reinforced with boron carbide (B 4 C) for enhanced hardness and molybdenum disulfide (MoS 2 ) for self‐lubricating properties. The key tribological parameters considered are normal load (10 N, 25 N, 40 N), sliding speed (0.5 m/s, 1.25 m/s, 2 m/s), and temperature (50 °C, 125 °C, 200 °C). They were systematically varied to analyze their effects on wear rate, using a pin‐on‐disc tribometer. A Box‐Behnken method was employed to evaluate the wear rate with interactions and quadratic effects of the considered tribological parameters. The results indicate that sliding speed and load significantly influence the wear rate while temperature has a secondary but notable effect. Regression models were developed to predict wear behavior, with response surface plots used to visualize interactions. Additionally, scanning electron microscopy (SEM), x‐ray diffraction (XRD) and wear morphology of worn surfaces is studied. This study highlights the potential of the Box‐Behnken methodology in optimizing process parameters with minimal experimental trials while providing detailed insights into material behavior.

Zitieren

APA

Chauhan, D., Sahni, M., Badheka, V., & Mehta, K. (2026). Optimizing tribological process parameters in hybrid metal matrix composites using the Box‐Behnken method. Materialwissenschaft und Werkstofftechnik, 57(2), 124-133. https://doi.org/10.1002/mawe.70089

Vancouver

Chauhan D, Sahni M, Badheka V, Mehta K. Optimizing tribological process parameters in hybrid metal matrix composites using the Box‐Behnken method. Materialwissenschaft und Werkstofftechnik. 2026;57(2):124-133. doi:10.1002/mawe.70089

BibTeX
@article{Chauhan2026,
  author = {Chauhan, D. and Sahni, M. and Badheka, V. and Mehta, K.},
  title = {Optimizing tribological process parameters in hybrid metal matrix composites using the Box‐Behnken method},
  journal = {Materialwissenschaft und Werkstofftechnik},
  year = {2026},
  volume = {57},
  number = {2},
  pages = {124--133},
  doi = {10.1002/mawe.70089}
}
Kostenlos starten →