EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Overlap joining of EN AW 7075 with laser beam welding in vacuum

B.O. Gerhards, B. Gerhards, B. Macke, P. Häuser, M. Schleser, P. Liebe

Materialwissenschaft und Werkstofftechnik · 2025-03 · 56 (3) · 376-387

DOI: 10.1002/mawe.202400205 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materialwissenschaft und Werkstofftechnik, online erschienen am 25.03.2025. Verfasst von B.O. Gerhards und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The integration of EN AW 7075 aluminium in Body in White structures is a promising way to achieve weight savings, which in turn can make a significant contribution to reducing CO 2 ‐emissions. However, due to hot cracking susceptibility, conventional welding technologies offer limited possibilities to join the material. Therefore, laser beam welding in vacuum is introduced as a comparatively new joining technique. The investigations show, that it is possible to weld the EN AW 7075 alloy in an overlap joint configuration without pores or microcracks appearing in the weld seam. The weld seam has a very fine‐grained structure, which presumably has a favourable effect on hot cracking mechanism. The prevention of cracking is likely due to the lower temperature gradient between the capillary wall and the fusion line caused by the low evaporation temperature due to the reduced pressure. The reduced temperature results in lower residual stresses, which presumably has a positive effect on the tendency to hot cracking. In addition, the fine‐grained structures can absorb strain better than coarse grain structures, that usually occur in conventional laser beam welding.

Zitieren

APA

Gerhards, B., Gerhards, B., Macke, B., Häuser, P., Schleser, M., & Liebe, P. (2025). Overlap joining of EN AW 7075 with laser beam welding in vacuum. Materialwissenschaft und Werkstofftechnik, 56(3), 376-387. https://doi.org/10.1002/mawe.202400205

Vancouver

Gerhards B, Gerhards B, Macke B, Häuser P, Schleser M, Liebe P. Overlap joining of EN AW 7075 with laser beam welding in vacuum. Materialwissenschaft und Werkstofftechnik. 2025;56(3):376-387. doi:10.1002/mawe.202400205

BibTeX
@article{Gerhards2025,
  author = {Gerhards, B.O. and Gerhards, B. and Macke, B. and Häuser, P. and Schleser, M. and Liebe, P.},
  title = {Overlap joining of EN AW 7075 with laser beam welding in vacuum},
  journal = {Materialwissenschaft und Werkstofftechnik},
  year = {2025},
  volume = {56},
  number = {3},
  pages = {376--387},
  doi = {10.1002/mawe.202400205}
}
Kostenlos starten →