Transforming waste red mud and fly ash to wealth by designing a hybrid Al alloy composite with improved mechanical and tribological properties
Materialwissenschaft und Werkstofftechnik · 2025-01 · 56 (1) · 122-131
DOI: 10.1002/mawe.202300378 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materialwissenschaft und Werkstofftechnik, online erschienen am 15.01.2025. Verfasst von S. Kumar und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
In the present work, we demonstrate the development of a cost‐effective hybrid composite of aluminium 6063 alloys by utilizing some industrial wastes like fly ash and red mud as reinforcement. Alloy composites have been produced with varying concentrations of reinforcement by a two‐step stir‐casting method. X‐ray diffraction (XRD) confirmed the presence of fly ash and red mud whereas microstructural analysis through optical microscopy showed a uniform distribution of the reinforcements within the alloy matrix. The composite formed with optimized weight fractions of red mud and fly ash exhibited higher ultimate tensile strength in comparison with base aluminium alloy. Furthermore, the dry sliding wear behaviour of the alloy and its composites have been investigated at low sliding speed against a hardened disk at three different loads (2 kg, 3 kg and 4 kg). The wear rate increases with increasing load in the alloy as well as in the composite. Sem images of worn surfaces of the hybrid composite exhibit fewer grooves when 5 wt.‐% of both reinforcements are present. Essentially, the overall wear rate of the composite is found lower than the base alloy. Hybrid composites with 5 wt.‐% of both reinforcements show maximum wear resistance.
Zitieren
APA
Kumar, S., Bera, S., Mandal, D., & Chakraborty, A. K. (2025). Transforming waste red mud and fly ash to wealth by designing a hybrid Al alloy composite with improved mechanical and tribological properties. Materialwissenschaft und Werkstofftechnik, 56(1), 122-131. https://doi.org/10.1002/mawe.202300378
Vancouver
Kumar S, Bera S, Mandal D, Chakraborty AK. Transforming waste red mud and fly ash to wealth by designing a hybrid Al alloy composite with improved mechanical and tribological properties. Materialwissenschaft und Werkstofftechnik. 2025;56(1):122-131. doi:10.1002/mawe.202300378
BibTeX
@article{Kumar2025,
author = {Kumar, S. and Bera, S. and Mandal, D. and Chakraborty, A. K.},
title = {Transforming waste red mud and fly ash to wealth by designing a hybrid Al alloy composite with improved mechanical and tribological properties},
journal = {Materialwissenschaft und Werkstofftechnik},
year = {2025},
volume = {56},
number = {1},
pages = {122--131},
doi = {10.1002/mawe.202300378}
}
EUVIMED