EUVIMEDEUVIMED entdecken
Crossref

Two LPBF Machines, One Alloy: Comparative Characterization of Mechanical, Physical, and Surface Properties of Additively Manufactured Ti‐6Al‐4 V

Alexandru Paraschiv, Constantin Romica Stoica, Sebastian‐Gabriel Bucaciuc

Macromolecular Symposia · 2026-08 · 415 (4)

DOI: 10.1002/masy.70422 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Symposia, online erschienen am 02.07.2026. Verfasst von Alexandru Paraschiv und 2 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inter‐machine reproducibility in Laser Powder Bed Fusion (LPBF) of Ti‐6Al‐4V was evaluated using two generations (Gen I, Gen II) of the same platform (DMG MORI LASERTEC 30 SLM) operated under identical process parameters and nominally equivalent powder feedstock. Both systems achieved near‐full densification (>99% relative density) and tensile properties meeting ASTM F2924 requirements. Gen I samples exhibited slightly higher density and higher ultimate tensile and proof strengths, together with slightly lower as‐built surface roughness, compared to Gen II. These differences may be partially attributed to minor variations in powder chemical composition, which could have influenced melt‐pool behavior and the resulting properties. Overall, the results show that even nominally identical LPBF machines can produce measurable variations in density, surface quality, and mechanical performance, highlighting the need for machine‐specific calibration and qualification to ensure reproducible Ti‐6Al‐4V production.

Zitieren

APA

Paraschiv, A., Stoica, C. R., & Bucaciuc, S. (2026). Two LPBF Machines, One Alloy: Comparative Characterization of Mechanical, Physical, and Surface Properties of Additively Manufactured Ti‐6Al‐4 V. Macromolecular Symposia, 415(4). https://doi.org/10.1002/masy.70422

Vancouver

Paraschiv A, Stoica CR, Bucaciuc S. Two LPBF Machines, One Alloy: Comparative Characterization of Mechanical, Physical, and Surface Properties of Additively Manufactured Ti‐6Al‐4 V. Macromolecular Symposia. 2026;415(4). doi:10.1002/masy.70422

BibTeX
@article{Paraschiv2026,
  author = {Paraschiv, Alexandru and Stoica, Constantin Romica and Bucaciuc, Sebastian‐Gabriel},
  title = {Two LPBF Machines, One Alloy: Comparative Characterization of Mechanical, Physical, and Surface Properties of Additively Manufactured Ti‐6Al‐4 V},
  journal = {Macromolecular Symposia},
  year = {2026},
  volume = {415},
  number = {4},
  doi = {10.1002/masy.70422}
}
Kostenlos starten →