EUVIMEDEUVIMED entdecken
Crossref

Influence of 3D Printing Parameters on Mechanical and Elastic Characteristics

Ana‐Maria Talinga, Miruna Ciolca, Catalin Andrei Neagoe, Mihai Costea, Florin Baciu, Anton Hadar

Macromolecular Symposia · 2026-08 · 415 (4)

DOI: 10.1002/masy.70418 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Symposia, online erschienen am 10.07.2026. Verfasst von Ana‐Maria Talinga und 5 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates how two key 3D printing parameters—infill density and layer orientation—affect the mechanical behavior of PLA specimens produced using Fused Deposition Modeling (FDM) under tensile loading. Standardized tensile samples were designed per ISO 6892‐1 in CATIA V5 and printed using Crealty software, with infill density set at 30%, 60%, and 90%, and layer orientation varied in three directions (A, B, and C). All other printing settings, including extrusion temperature, speed, and linear infill pattern, were kept constant to isolate these variables. Mechanical performance was evaluated through Digital Image Correlation (DIC), a precise optical method for measuring strain and deformation. Results showed that higher infill density increased stiffness and tensile strength, while the layer orientation had a significant impact on failure behavior. Specimens printed in C orientation, where filament layers aligned with the tensile direction, demonstrated superior strength and uniform stress distribution. Conversely, A orientation samples failed prematurely due to delamination and crack initiation at interlayer boundaries. Overall, the study highlights that optimizing infill density and layer orientation is essential for enhancing the structural integrity and functional performance of FDM‐printed PLA components.

Zitieren

APA

Talinga, A., Ciolca, M., Neagoe, C. A., Costea, M., Baciu, F., & Hadar, A. (2026). Influence of 3D Printing Parameters on Mechanical and Elastic Characteristics. Macromolecular Symposia, 415(4). https://doi.org/10.1002/masy.70418

Vancouver

Talinga A, Ciolca M, Neagoe CA, Costea M, Baciu F, Hadar A. Influence of 3D Printing Parameters on Mechanical and Elastic Characteristics. Macromolecular Symposia. 2026;415(4). doi:10.1002/masy.70418

BibTeX
@article{Talinga2026,
  author = {Talinga, Ana‐Maria and Ciolca, Miruna and Neagoe, Catalin Andrei and Costea, Mihai and Baciu, Florin and Hadar, Anton},
  title = {Influence of 3D Printing Parameters on Mechanical and Elastic Characteristics},
  journal = {Macromolecular Symposia},
  year = {2026},
  volume = {415},
  number = {4},
  doi = {10.1002/masy.70418}
}
Kostenlos starten →