EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Infill on the Tensile Strength of some Mini‐Test Specimens Manufactured by 3D Printing From PLA

Vlada Țisari, Alexandra‐Anamaria Spiridon, Adinda Hairil, Roxana‐Gabriela Hobjâlă, Cosmin‐Gabriel Grădinaru, Gheorghe Nagîț, Alexei Toca, Laurențiu Slătineanu

Macromolecular Symposia · 2026-06 · 415 (3)

DOI: 10.1002/masy.70367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Symposia, online erschienen am 05.05.2026. Verfasst von Vlada Țisari und 7 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In industrial practice, situations may be encountered where small parts manufactured by 3D printing from polymeric materials are subjected to tensile stresses. Since standard tensile testing machines are not recommended for performing tests for values less than 10% of the machine's maximum nominal force, it is necessary to design and build a mini‐equipment (or mini‐testing rig) intended to allow the tensile testing of mini‐test specimens. Using this mini‐equipment, tensile tests are performed on polylactic acid (PLA) mini‐specimens manufactured by 3D printing. The specimens are printed with different infill values, aiming to highlight the influence this factor exerts on the magnitude of the tensile strength. Empirical mathematical models are determined to highlight the influence of the infill magnitude on the ultimate tensile strength (UTS) in the case of polylactic acid mini‐specimens.

Zitieren

APA

Țisari, V., Spiridon, A., Hairil, A., Hobjâlă, R., Grădinaru, C., Nagîț, G., Toca, A., & Slătineanu, L. (2026). The Influence of Infill on the Tensile Strength of some Mini‐Test Specimens Manufactured by 3D Printing From PLA. Macromolecular Symposia, 415(3). https://doi.org/10.1002/masy.70367

Vancouver

Țisari V, Spiridon A, Hairil A, Hobjâlă R, Grădinaru C, Nagîț G, et al. The Influence of Infill on the Tensile Strength of some Mini‐Test Specimens Manufactured by 3D Printing From PLA. Macromolecular Symposia. 2026;415(3). doi:10.1002/masy.70367

BibTeX
@article{isari2026,
  author = {Țisari, Vlada and Spiridon, Alexandra‐Anamaria and Hairil, Adinda and Hobjâlă, Roxana‐Gabriela and Grădinaru, Cosmin‐Gabriel and Nagîț, Gheorghe and Toca, Alexei and Slătineanu, Laurențiu},
  title = {The Influence of Infill on the Tensile Strength of some Mini‐Test Specimens Manufactured by 3D Printing From PLA},
  journal = {Macromolecular Symposia},
  year = {2026},
  volume = {415},
  number = {3},
  doi = {10.1002/masy.70367}
}
Kostenlos starten →