Synthesis and Dielectric Properties of Star‐Shaped Poly(Phenylene Oxide) Resins
Macromolecular Rapid Communications · 03.11.2026
DOI: 10.1002/marc.70470 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, online erschienen am 03.11.2026. Verfasst von Yakun Gong und 4 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory for Special Functional Aggregated Materials of Ministry of Education, School of Chemistry and Chemical Engineering, Shandong Universit…. Die Arbeit nennt 30 Literaturangaben. Gefördert von: Key R&D Plan of Shandong Province, Shandong Province Key Research and Development Plan.
Abstract (Originalsprache)
High‐frequency copper‐clad laminates require thermosetting resins with low dielectric loss, high thermal resistance, and good melt processability. However, high‐molecular‐weight linear poly(phenylene oxide) (PPO) suffers from poor melt flowability, while molecular‐weight reduction can compromise network rigidity. In this work, a four‐arm star‐shaped vinyl‐terminated PPO precursor (sPPO‐V) was synthesized using tetrafunctional initiator TDPE. Molecular‐weight‐matched high‐molecular‐weight linear PPO (HMW‐PPO) was prepared as a control to evaluate the effect of molecular architecture. SEC, 1H NMR, and FT‐IR analyses confirmed the successful synthesis of the star‐shaped precursor. Rheological measurements demonstrated that sPPO exhibited reduced melt viscosity compared with linear PPO controls, including HMW‐PPO with comparable molecular weight. After curing, sPPO‐V showed an increased glass‐transition temperature of 220°C, together with improved dielectric properties ( D k = 2.50, D f = 2.11 × 10 −3 at 1 GHz), thermal stability ( T d5 = 330°C), and moisture resistance (water contact angle of 98.3° and water uptake of 0.18% after 72 h). The enhanced performance was attributed to the multi‐arm architecture‐induced topological constraints and reduced molecular packing efficiency. This work demonstrates that molecular architecture engineering is an effective strategy for balancing processability, thermal rigidity, dielectric performance, and moisture resistance in PPO‐based thermosetting resins.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory for Special Functional Aggregated Materials of Ministry of Education, School of Chemistry and Chemical Engineering, Shandong University, Jinan, People's Republic of China.
- HezeVocational College, Heze, Shandong, People's Republic of China.
ORCID-Profile: Zaijun Lu
Förderung
- Key R&D Plan of Shandong Province
- Shandong Province Key Research and Development Plan
Zitieren
APA
Gong, Y., Fu, W., Zhao, Y., Chen, Y., & Lu, Z. (2026). Synthesis and Dielectric Properties of Star‐Shaped Poly(Phenylene Oxide) Resins. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.70470
Vancouver
Gong Y, Fu W, Zhao Y, Chen Y, Lu Z. Synthesis and Dielectric Properties of Star‐Shaped Poly(Phenylene Oxide) Resins. Macromolecular Rapid Communications. 2026. doi:10.1002/marc.70470
BibTeX
@article{Gong2026,
author = {Gong, Yakun and Fu, Wenbo and Zhao, Ying and Chen, Yezhen and Lu, Zaijun},
title = {Synthesis and Dielectric Properties of Star‐Shaped Poly(Phenylene Oxide) Resins},
journal = {Macromolecular Rapid Communications},
year = {2026},
doi = {10.1002/marc.70470}
}
EUVIMED