Chemically and Mechanically Recyclable Polyolefins Incorporating Covalent Adaptable Networks
Macromolecular Rapid Communications · 01.07.2026
DOI: 10.1002/marc.70349 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, online erschienen am 01.07.2026. Verfasst von Andrii Tiiara und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Clemson University, Clemson, South Carolina, USA. Die Arbeit nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.
Abstract (Originalsprache)
We report on the synthesis and characterization of mechanically and chemically recyclable polypropylene‐based crosslinked polyolefins (CR‐POs) incorporating ester‐containing covalent adaptable networks (CANs). To obtain the material, polypropylene (PP, Mn ≈ 3900 g/mol) modified with maleic anhydride (MA) is crosslinked via epoxy–anhydride polymerization using 1,4‐butanediol diglycidyl ether (BDE) in the presence of ZnCl 2 catalyst. Variation of the anhydride‐to‐epoxy (A/E) ratio shows that A/E ≈ 0.5 is the most effective formulation. The resulting crosslinked networks have a gel‐fraction of ∼75% yet remain melt‐processable through extrusion and compression molding due to CANs. CR‐POs are semicrystalline materials with Tm ≈ 140°C and crystallinity of ∼25%. The first‐generation material's flexural modulus (520 MPa) and stress at 5% strain (22 MPa) were intermediate between HDPE and LDPE. The CR‐PO materials can be mechanically reprocessed for at least five compression‐molding cycles without significant degradation of thermal or mechanical properties. CR‐POs can be depolymerized via transesterification to a low‐molecular‐weight polyolefin and repolymerized using BDE after modification with MA. The second‐generation chemically recycled networks exhibited a flexural modulus of 390 MPa and stress at 5% strain of 13 MPa. This work shows a practical route to mechanically and chemically recyclable polyolefin thermosets, advancing circular design for polyolefins.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Clemson University, Clemson, South Carolina, USA.
- Nanostructured Materials Laboratory, University of Georgia, Athens, Georgia, USA.
Förderung
- National Science Foundation
Zitieren
APA
Tiiara, A., Daichendt, B., Minko, S., Kuksenok, O., & Luzinov, I. (2026). Chemically and Mechanically Recyclable Polyolefins Incorporating Covalent Adaptable Networks. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.70349
Vancouver
Tiiara A, Daichendt B, Minko S, Kuksenok O, Luzinov I. Chemically and Mechanically Recyclable Polyolefins Incorporating Covalent Adaptable Networks. Macromolecular Rapid Communications. 2026. doi:10.1002/marc.70349
BibTeX
@article{Tiiara2026,
author = {Tiiara, Andrii and Daichendt, Bernadine and Minko, Sergiy and Kuksenok, Olga and Luzinov, Igor},
title = {Chemically and Mechanically Recyclable Polyolefins Incorporating Covalent Adaptable Networks},
journal = {Macromolecular Rapid Communications},
year = {2026},
doi = {10.1002/marc.70349}
}
EUVIMED