EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Tunable Elasto‐Viscoplastic Properties of Polymer Blends for 3D Printing Applications

Ases Akas Mishra iD, Manoj Chandregowda, Janina Faiß, Marko Bek, Ann E Terry, Kim Nygård, Dragana Arlov, Roland Kádár

Macromolecular Rapid Communications · 2025

DOI: 10.1002/marc.202500249 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Ases Akas Mishra und 7 weiteren Autor:innen. Beteiligte Einrichtung: Chalmers University of Technology, Department of Industrial and Materials Science, Göteborg, Sweden. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Polymers, Polyethylene Glycols. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: HORIZON EUROPE Marie Sklodowska-Curie Actions, Swedish Research council, Swedish Governmental Agency for Innovation Systems.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Post‐extrusion flow dynamics of soft matter are governed by their elasto‐viscoplastic (EVP) rheological properties, which influence filament stability, die swelling, and shape fidelity in extrusion‐based 3D printing. Achieving precision and control in printed structures requires optimizing yield stress, viscoelasticity, and extrusion pressure to minimize excessive die swelling and material spreading, which can lead to unstable extrusion and poor print fidelity. We investigate Carbopol‐polyethylene oxide (PEO) blends as model EVP fluids, systematically varying their composition to assess die swelling, print width, and deposition accuracy. Rheo‐SAXS measurements reveal that die swelling can be directly related to characteristic nanoscale lengthscales. Parametric analysis using the Ohnesorge () and modified Bingham () numbers reveals that at high (yield stress, Pa) and , surface tension and viscoelastic effects dominate, leading to excessive die swelling and spreading upon deposition (up to 1.6 and 6 times the nozzle diameter, respectively), ultimately causing drop formation rather than stable filament extrusion. Conversely, and ensure optimal printability, high shape fidelity, and minimal die swelling. These findings guide EVP formulation and optimal extrusion pressure using dimensionless groups that capture material rheology and flow behavior.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalPolymersPolyethylene GlycolsViscosityElasticityRheology

Stichwörter der Autor:innen

3D printingdie swellingelasto‐viscoplasticinkjet printingviscoelasticityyield stress

Substanzen

PolymersPolyethylene Glycols

Autor:innen und Institutionen

  • Chalmers University of Technology, Department of Industrial and Materials Science, Göteborg, Sweden.
  • Chalmers University of Technology, Department of Chemistry and Chemical Engineering, Göteborg, Sweden.
  • University of Stuttgart, Chemical- and Bio-Engineering, Stuttgart, Germany.
  • LINXS Institute of advanced Neutron and X-ray Science (LINXS), Lund, Sweden.
  • Lund University, MAX IV Laboratory, Lund, Sweden.
  • Tetra Pak Processing Systems, Lund, Sweden.

ORCID-Profile: Ases Akas Mishra

Förderung

  • HORIZON EUROPE Marie Sklodowska-Curie Actions
  • Swedish Research council
  • Swedish Governmental Agency for Innovation Systems
  • Formas
  • Vinnova

Zitieren

APA

Mishra, A. A., Chandregowda, M., Faiß, J., Bek, M., Terry, A. E., Nygård, K., Arlov, D., & Kádár, R. (2025). Tunable Elasto‐Viscoplastic Properties of Polymer Blends for 3D Printing Applications. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202500249

Vancouver

Mishra AA, Chandregowda M, Faiß J, Bek M, Terry AE, Nygård K, et al. Tunable Elasto‐Viscoplastic Properties of Polymer Blends for 3D Printing Applications. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202500249

BibTeX
@article{Mishra2025,
  author = {Mishra, Ases Akas and Chandregowda, Manoj and Faiß, Janina and Bek, Marko and Terry, Ann E and Nygård, Kim and Arlov, Dragana and Kádár, Roland},
  title = {Tunable Elasto‐Viscoplastic Properties of Polymer Blends for 3D Printing Applications},
  journal = {Macromolecular Rapid Communications},
  year = {2025},
  doi = {10.1002/marc.202500249}
}
Kostenlos starten →