Multifunctional Electroactive 3D‐Printed Scaffolds with Polypyrrole‐Based Coatings for Biomedical Applications
Macromolecular Rapid Communications · 2025
DOI: 10.1002/marc.202500246 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Felipe Olate-Moya und 4 weiteren Autor:innen. Beteiligte Einrichtung: Centro de Investigaciones Nucleares para Aplicaciones en Salud y Biomedicina, Comisión Chilena de Energía Nuclear, Las Condes, Chile. Hauptthemen laut MEDLINE: Pyrroles, Polymers, Printing, Three-Dimensional, Tissue Scaffolds. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: FONDECYT de Postdoctorado, ANID-Basal IMPACT, Exploración.
Abstract (Originalsprache)
Several intrinsic electroconductive polymers have been studied for tissue engineering and biomedical applications, as they can mimic the cell microenvironment of some electroactive tissues and have body‐sensing capacity. However, these polymers often lack good processability and biocompatibility, complicating the development of appropriate biomaterials or devices such as cell scaffolds and biosensors. To overcome these issues, a two‐step method was introduced to coat 3D‐printed poly (ε‐caprolactone) (PCL) scaffolds with intrinsic electroconductive polypyrrole (PPy) and gelatin (GEL). Compared to pure 3D‐printed PCL, the coated hybrid scaffolds exhibited 12 orders of magnitude higher electrical conductivity, ionic conduction capacity, rougher topography, and even a 5% higher compressive strength while maintaining the main properties of PCL. The proliferation of human mesenchymal stem cells (hMSCs) was 13% higher in the PPy‐coated scaffolds after 14 days, further exhibiting rounded cell morphologies, unlike the flattened shapes seen on the PCL controls. The high conductivity of the scaffolds produced by our two‐step methodology further allows their use as electrodes for electromyogram measurement and piezoresistive sensors. Noteworthy, the coated biomaterials can be used as a triboelectric nanogenerator (TENG), achieving an output power density of 4–6 mW m⁻ 2 under the mechanical contact‐separation stimulus. These findings highlight the potential application of our approach for developing multifunctional electroactive PPy‐coated PCL biomaterials for tissue engineering, biosensing, piezoresistive sensors, and TENG.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Centro de Investigaciones Nucleares para Aplicaciones en Salud y Biomedicina, Comisión Chilena de Energía Nuclear, Las Condes, Chile.
- Centro de Investigación e Innovación Biomédica, Facultad de Medicina, Universidad de los Andes, Las Condes, Chile.
- IMPACT, Center of Interventional Medicine for Precision and Advanced Cellular Therapy, Las Condes, Chile.
- Departamento de Ingeniería Mecánica, Facultad de Ingeniería y Ciencias, Universidad de La Frontera, Francisco Salazar 01145, Temuco, Chile.
- Departamento de Ingeniería Química, Biotecnología y Materiales, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Santiago, Chile.
- Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, University of Chile, Independencia, Chile.
ORCID-Profile: Humberto Palza
Förderung
- FONDECYT de Postdoctorado
- ANID-Basal IMPACT
- Exploración
- FONDEQUIP
- ANID Beca de Doctorado Nacional
Zitieren
APA
Olate-Moya, F., Fernández-Gil, F., Solano, L., Córdova, L., & Palza, H. (2025). Multifunctional Electroactive 3D‐Printed Scaffolds with Polypyrrole‐Based Coatings for Biomedical Applications. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202500246
Vancouver
Olate-Moya F, Fernández-Gil F, Solano L, Córdova L, Palza H. Multifunctional Electroactive 3D‐Printed Scaffolds with Polypyrrole‐Based Coatings for Biomedical Applications. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202500246
BibTeX
@article{OlateMoya2025,
author = {Olate-Moya, Felipe and Fernández-Gil, Francisco and Solano, Luis and Córdova, Luis and Palza, Humberto},
title = {Multifunctional Electroactive 3D‐Printed Scaffolds with Polypyrrole‐Based Coatings for Biomedical Applications},
journal = {Macromolecular Rapid Communications},
year = {2025},
doi = {10.1002/marc.202500246}
}
EUVIMED