Multifunctional Chitosan–Covalent Bonded Multi‐Walled Carbon Nanotubes Composite Binder for Enhanced Electrochemical Performances of Lithium–Sulfur Batteries
Macromolecular Rapid Communications · 2025
DOI: 10.1002/marc.202500155 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Qiuying Gou und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University, 2999 North Renmin Rd, Songjiang, …. Hauptthemen laut MEDLINE: Nanotubes, Carbon, Lithium, Chitosan, Sulfur. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Lithium–sulfur batteries (LSBs) are considered as one of the most promising next‐generation energy‐storage devices because of their high energy density. However, the long‐term use of LSBs is mainly limited by polysulfide shuttling and cathode structural degradation caused by volume changes during charging and discharging. To address these issues, a multifunctional, high‐performance aqueous binder is developed by modifying a natural polysaccharide with multi‐walled carbon nanotubes (MWCNTs). Specifically, the catechol‐conjugated chitosan (CCS) acts as the binder, showing strong polysulfide adsorption, while the MWCNTs covalently bonded to CCS enhance the mechanical toughness and electronic conductivity. The resulting CCS‐MWCNTs composite binder exhibits a tensile strength of 40 MPa and a strain at break of 300%, which are higher than those of CCS. As a binder for sulfur cathodes, the CCS‐MWCNTs binder demonstrates superior cyclic stability and rate capability. At a sulfur loading of 2.0 mg cm⁻ 2 , it delivers an initial capacity of 1016 mAh g⁻¹ at 0.2 C and retains 690 mAh g⁻¹ after 100 cycles, significantly outperforming commercial polyvinylidene difluoride (PVDF), sodium carboxymethylcellulose/styrene butadiene rubber (CMC/SBR), and CCS binders. This study demonstrates the potential applications of polysaccharide binders in metal‐sulfur batteries by innovatively incorporating carbon nanotubes into the biopolymer binder, providing a promising alternative for environmentally friendly energy storage.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Advanced Fiber Materials, College of Materials Science and Engineering, Donghua University, 2999 North Renmin Rd, Songjiang, Shanghai, 201620, China.
- Institute of Electrochemical Energy Storage, Helmholtz-Zentrum Berlin für Materialien und Energie, Hahn-Meitner-Platz 1, 14109, Berlin, Germany.
- Institute for Technical and Environmental Chemistry, Friedrich-Schiller-Universität Jena, Philosophenweg 7b, 07743, Jena, Germany.
- Helmholtz Institute for Polymers in Energy Applications (HIPOLE Jena), Lessingstraße 12-14, 07743, Jena, Germany.
ORCID-Profile: Liqiang Lu, Yan Lu
Zitieren
APA
Gou, Q., Lu, L., Lin, S., Zhang, W., Ayllon, Y. R., Zhou, Z., Zhu, L., & Lu, Y. (2025). Multifunctional Chitosan–Covalent Bonded Multi‐Walled Carbon Nanotubes Composite Binder for Enhanced Electrochemical Performances of Lithium–Sulfur Batteries. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202500155
Vancouver
Gou Q, Lu L, Lin S, Zhang W, Ayllon YR, Zhou Z, et al. Multifunctional Chitosan–Covalent Bonded Multi‐Walled Carbon Nanotubes Composite Binder for Enhanced Electrochemical Performances of Lithium–Sulfur Batteries. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202500155
BibTeX
@article{Gou2025,
author = {Gou, Qiuying and Lu, Liqiang and Lin, Shengxuan and Zhang, Wei and Ayllon, Yael Rodriguez and Zhou, Zhe and Zhu, Liping and Lu, Yan},
title = {Multifunctional Chitosan–Covalent Bonded Multi‐Walled Carbon Nanotubes Composite Binder for Enhanced Electrochemical Performances of Lithium–Sulfur Batteries},
journal = {Macromolecular Rapid Communications},
year = {2025},
doi = {10.1002/marc.202500155}
}
EUVIMED