Nonlinear Influence of Blending Star and Triblock Copolymers on Morphological and Mechanical Properties of Thermoplastic Elastomers
Macromolecular Rapid Communications · 2025
DOI: 10.1002/marc.202500131 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Max G Schußmann und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstraße 18, 76131, Karlsruhe, Germany. Hauptthemen laut MEDLINE: Elastomers, Polymers, Polystyrenes. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation, Deutsche Forschungsgemeinschaft.
Abstract (Originalsprache)
To tune the mechanical properties of thermoplastic elastomers, a linear Poly(styrene (S)‐ b ‐isoprene (I)‐ b ‐styrene (S)) triblock copolymer (SIS) is blended with well‐defined symmetric star‐shaped PS‐PI block copolymers with 8 and 15 arms, respectively. The model systems are synthesized via anionic polymerization and grafting‐onto techniques and have a lamellar morphology with the long‐range order L 0 for the SIS larger than the stars. Morphological analysis using small angle X‐ray scattering (SAXS) and atom force microscopy (AFM) reveals a nonlinear dependency of L 0 as a function of the star content, ϕ star . For small star contents, L 0 of the blends increases above L 0 of the individual compounds. The stars show significantly higher mechanical performance than the SIS, by an increased elongation at break, ε b , by +15% and +38%, and an increased ultimate tensile strength, σ UTS , by about a factor of 2. For the blends, the mechanical properties highly depend on the star content, and can be fully uncoupled from the ones of the SIS and the star: at small star contents ε b is significantly improved beyond ε b,star , but σ UTS decreases below σ UTS,SIS . For higher star contents, σ UTS strongly increases toward σ UTS,star , whereas ε b shows a minimum around ϕ star = 50 wt.%, before increasing to ε b,star .
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Institute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), Engesserstraße 18, 76131, Karlsruhe, Germany.
- Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology (KIT), Am Forum 8, 76131, Karlsruhe, Germany.
- Institute of Nanotechnology, Karlsruhe Institute of Technology (KIT), Am Forum 8, 76131, Karlsruhe, Germany.
- Institute for Technical Chemistry, Technical University Clausthal, Arnold-Sommerfeld-Str. 4, 38678, Clausthal-Zellerfeld, Germany.
ORCID-Profile: Max G Schußmann, Jonathan Berson, Manfred Wilhelm, Valerian Hirschberg
Förderung
- German Research Foundation
- Deutsche Forschungsgemeinschaft
Zitieren
APA
Schußmann, M. G., Dias, L. R., Buchheiser, S., Nirschl, H., Berson, J., Wilhelm, M., & Hirschberg, V. (2025). Nonlinear Influence of Blending Star and Triblock Copolymers on Morphological and Mechanical Properties of Thermoplastic Elastomers. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202500131
Vancouver
Schußmann MG, Dias LR, Buchheiser S, Nirschl H, Berson J, Wilhelm M, et al. Nonlinear Influence of Blending Star and Triblock Copolymers on Morphological and Mechanical Properties of Thermoplastic Elastomers. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202500131
BibTeX
@article{Schumann2025,
author = {Schußmann, Max G and Dias, Leonardo Rocha and Buchheiser, Simon and Nirschl, Hermann and Berson, Jonathan and Wilhelm, Manfred and Hirschberg, Valerian},
title = {Nonlinear Influence of Blending Star and Triblock Copolymers on Morphological and Mechanical Properties of Thermoplastic Elastomers},
journal = {Macromolecular Rapid Communications},
year = {2025},
doi = {10.1002/marc.202500131}
}
EUVIMED