Electrospun Polybutylene Succinate Coatings for Sustainable Cardboard Packaging: Structure‐Property Relationships
Macromolecular Rapid Communications · 2025
DOI: 10.1002/marc.202500048 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Allison Vercasson und 6 weiteren Autor:innen. Beteiligte Einrichtung: JRU IATE, University of Montpellier, INRAE, Institut Agro, 2 Place Pierre Viala, Montpellier, 34060, France. Hauptthemen laut MEDLINE: Polymers, Food Packaging, Polyenes, Paper. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Producing thin biopolymer‐coated paper and cardboard is essential for a large range of applications, such as food packaging, as it allows to maintain flexibility while reducing the environmental impact and enhancing barrier properties. This study investigates electrospinning to generate polybutylene succinate (PBS)‐coated cardboards with contrasted structures (i.e., different thicknesses of the individual layers). Four contrasted structures of PBS‐coated cardboards are produced, presenting low polymer thickness remaining on top of the substrate (10 to 25 µm) but differing in the thickness of their characteristic layers (including the impregnated layer). The effect of the electrospinning parameters (deposition time, method (direct vs indirect)) and annealing parameters on polymer‐coated cardboards’ structures are investigated. The annealing pressure only reduced the coated cardboard thickness, while the electrospinning method influenced the overall structure by affecting both the thickness of the impregnated layer and of the remaining layer of cardboard. The mechanical properties tested by tensile test are maintained or enhanced after coating while oxygen barrier properties are largely enhanced for some samples. Decreasing the impregnated layer thickness resulted in a Young's modulus increase (+3 to +23%) and a decrease in stress at break (−40 to −70%), highlighting the impact of polymer‐coated cardboards's structures on their mechanical properties.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- JRU IATE, University of Montpellier, INRAE, Institut Agro, 2 Place Pierre Viala, Montpellier, 34060, France.
- Novel Materials and Nanotechnology Group, Institute of Agrochemistry and Food Technology (IATA), Spanish Council for Scientific Research (CSIC), Calle Catedrático Agustín Escardino Benlloch 7, Paterna, 46980, Spain.
ORCID-Profile: Allison Vercasson
Zitieren
APA
Vercasson, A., Prieto, C., Gaucel, S., Gontard, N., Guillard, V., Angellier-Coussy, H., & Lagaron, J. M. (2025). Electrospun Polybutylene Succinate Coatings for Sustainable Cardboard Packaging: Structure‐Property Relationships. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202500048
Vancouver
Vercasson A, Prieto C, Gaucel S, Gontard N, Guillard V, Angellier-Coussy H, et al. Electrospun Polybutylene Succinate Coatings for Sustainable Cardboard Packaging: Structure‐Property Relationships. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202500048
BibTeX
@article{Vercasson2025,
author = {Vercasson, Allison and Prieto, Cristina and Gaucel, Sébastien and Gontard, Nathalie and Guillard, Valérie and Angellier-Coussy, Hélène and Lagaron, Jose M},
title = {Electrospun Polybutylene Succinate Coatings for Sustainable Cardboard Packaging: Structure‐Property Relationships},
journal = {Macromolecular Rapid Communications},
year = {2025},
doi = {10.1002/marc.202500048}
}
EUVIMED