Sustainable Production of Ion‐Conductive Polyelectrolytes by Ultrafast Photopolymerization of Lithium, Sodium, and Potassium Salts/Amide‐Based Deep Eutectic Monomers
Macromolecular Rapid Communications · 2025
DOI: 10.1002/marc.202401024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Reina Shinohe und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Organic Materials Science, Graduate School of Organic Materials Science, Yamagata University, 4-3-16, Jonan, Yamagata Prefecture, Yonez…. Hauptthemen laut MEDLINE: Lithium, Potassium, Sodium, Polyelectrolytes. Die Arbeit nennt 64 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Japan Society for the Promotion of Science.
Abstract (Originalsprache)
Herein, the photopolymerization of metal‐salt/amide‐based deep eutectic monomers (DEMs) derived from lithium, sodium, and potassium bis(trifluoromethanesulfonyl) imide (LiTFSI, NaTFSI, and KTFSI, respectively) is described. Three series of DEMs consisting of N ‐isopropyl acrylamide (NIPAM) and three different metal salts (LiTFSI, NaTFSI, and KTFSI) are tested at various molar ratios to identify suitable combinations. NIPAM/LiTFSI (1/0.2, 1/0.3, 1/0.4, and 1/0.5) and NIPAM/NaTFSI (1/0.2 and 1/0.3) are obtained as liquid DEMs by simple mixing under ambient conditions (≈25 °C in air), while NIPAM/KTFSI (1/0.1, 1/0.2, and 1/0.3) is obtained as a liquid DEM at 50 °C. The nature of the metal species and NIPAM/metal salt ratio affected the characteristic features of the DEMs and specific interactions. Ultrafast photopolymerization of NIPAM/metal salt DEMs is achieved using LED‐UV light, with nearly complete monomer conversion attained within 10 s. The mechanical and thermal properties of the polymerized DEMs (PDEMs) depended substantially on the metal species and NIPAM/metal salt ratio. P(NIPAM/0.2LiTFSI) with 20 wt.% succinonitrile (SN) serving as a plastic crystal exhibited the highest ionic conductivity (1.05 × 10 −4 S cm −1 at 55 °C), and P(NIPAM/0.2NaTFSI) and P(NIPAM/0.2KTFSI) also exhibited improved ionic conductivities of 4.19 × 10 −5 and 6.64 × 10 −5 S cm −1 , respectively, at 55 °C with 20 wt.% SN.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Organic Materials Science, Graduate School of Organic Materials Science, Yamagata University, 4-3-16, Jonan, Yamagata Prefecture, Yonezawa City, 992-8510, Japan.
- Chemistry Department, University Institute of Technology, University of Montpellier, 99 avenue d'Occitanie 34090, Montpellier, France.
ORCID-Profile: Hideharu Mori
Förderung
- Japan Society for the Promotion of Science
Zitieren
APA
Shinohe, R., Canet, M., Sasaki, Y., Kawaguchi, S., & Mori, H. (2025). Sustainable Production of Ion‐Conductive Polyelectrolytes by Ultrafast Photopolymerization of Lithium, Sodium, and Potassium Salts/Amide‐Based Deep Eutectic Monomers. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202401024
Vancouver
Shinohe R, Canet M, Sasaki Y, Kawaguchi S, Mori H. Sustainable Production of Ion‐Conductive Polyelectrolytes by Ultrafast Photopolymerization of Lithium, Sodium, and Potassium Salts/Amide‐Based Deep Eutectic Monomers. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202401024
BibTeX
@article{Shinohe2025,
author = {Shinohe, Reina and Canet, Maëlan and Sasaki, Yuya and Kawaguchi, Seigou and Mori, Hideharu},
title = {Sustainable Production of Ion‐Conductive Polyelectrolytes by Ultrafast Photopolymerization of Lithium, Sodium, and Potassium Salts/Amide‐Based Deep Eutectic Monomers},
journal = {Macromolecular Rapid Communications},
year = {2025},
doi = {10.1002/marc.202401024}
}
EUVIMED