Polysiloxane‐Modified PMMA‐Shell Phase Change Microcapsules for Thermal Management Fabrics
Macromolecular Rapid Communications · 2025-03 · 46 (6)
DOI: 10.1002/marc.202400942 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, online erschienen am 27.01.2025. Verfasst von Yang Chen und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Chemical and Biological Engineering, Zhejiang University, Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture …. Hauptthemen laut MEDLINE: Siloxanes, Polymethyl Methacrylate, Textiles. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Natural Science Foundation of China, "Leading Goose" R&D Project of Zhejiang Province, Institute of Zhejiang University-Quzhou.
Abstract (Originalsprache)
Critical issues such as leakage, degradation, and thermal response hysteresis have become the focus in the application of phase change materials (PCMs) in area such as thermal management of fabrics. The encapsulation of PCMs prepared as microcapsules using polysiloxanes, etc. as a component unit of crosslinking agents represents a highly promising avenue of research. In this work, organosilicon crosslinkers are prepared and employed for the crosslinking of poly (methyl methacrylate) (PMMA) for microencapsulation of paraffin wax in microcapsule phase change materials (mPCMs). The results showed that increasing the degree of crosslinking helps to improve the performance of mPCMs by smoothing the shell surface, but excessive crosslinking leads to flocculation, which reduces its performance. The mPCMs produced with 10% wt crosslinking agent gave the highest performance with encapsulation efficiency, melting enthalpy and crystallization enthalpy of 81.3%, 285.0 J g −1 and 253.1 J g −1 , respectively. The obtained mPCMs are also combined with epoxy resin and fabrics to form composite materials. Notably, the polysiloxane‐modified mPCMs permit epoxy resins to achieve a maximum temperature reduction of 25 °C. By adjusting the mass ratio of organosilicon crosslinkers, the obtained mPCMs enable textiles to reach a maximum temperature reduction of 17 °C while maintaining satisfactory air permeability.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- College of Chemical and Biological Engineering, Zhejiang University, Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, Hangzhou, 310027, China.
- Zhejiang China Tobacco Industry Co., Ltd, Hangzhou, 310027, China.
- Institute of Zhejiang University-Quzhou, Zhejiang Provincial Innovation Center of Advanced Chemicals Technology, Quzhou, 324000, China.
ORCID-Profile: Feng Gao, Qinghua Zhang
Förderung
- National Natural Science Foundation of China
- "Leading Goose" R&D Project of Zhejiang Province
- Institute of Zhejiang University-Quzhou
- Zhejiang University Zhejiang China Tobacco Industry Co., Ltd. Joint Lab Project
Zitieren
APA
Chen, Y., Lu, X., Liu, Z., Xiao, W., Song, L., Lang, L., Li, H., Zhan, X., Gao, F., & Zhang, Q. (2025). Polysiloxane‐Modified PMMA‐Shell Phase Change Microcapsules for Thermal Management Fabrics. Macromolecular Rapid Communications, 46(6). https://doi.org/10.1002/marc.202400942
Vancouver
Chen Y, Lu X, Liu Z, Xiao W, Song L, Lang L, et al. Polysiloxane‐Modified PMMA‐Shell Phase Change Microcapsules for Thermal Management Fabrics. Macromolecular Rapid Communications. 2025;46(6). doi:10.1002/marc.202400942
BibTeX
@article{Chen2025,
author = {Chen, Yang and Lu, Xinbo and Liu, Ziqiang and Xiao, Weiqiang and Song, Lina and Lang, Linquan and Li, Hongqing and Zhan, Xiaoli and Gao, Feng and Zhang, Qinghua},
title = {Polysiloxane‐Modified PMMA‐Shell Phase Change Microcapsules for Thermal Management Fabrics},
journal = {Macromolecular Rapid Communications},
year = {2025},
volume = {46},
number = {6},
doi = {10.1002/marc.202400942}
}
EUVIMED