EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Deformation Behavior of Polymer Blend Thin Films

Geeta Pokhrel iD, Hyungyung Jo, Nicholas M Christ iD, Hyeyoung Son, John A Howarter iD, Chelsea S Davis iD

Macromolecular Rapid Communications · 2025

DOI: 10.1002/marc.202400736 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Geeta Pokhrel und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Engineering, Purdue University, West Lafayette, IN, 47907, USA. Hauptthemen laut MEDLINE: Polystyrenes, Polymers, Hemiterpenes, Butadienes. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Cooling Technologies Research Center, National Science Foundation Industry/University Cooperative Research Center at Purdue University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Examining the mechanical properties of polymer thin films is crucial for high‐performance applications such as displays, coatings, sensors, and thermal management. It is important to design thin film microstructures that excel in high‐demand situations without compromising mechanical integrity. Here, a polymer blend of polystyrene (PS) and polyisoprene (PI) is used as a model to explore microscale deformation behavior under uniaxial mechanical testing. Six thin film compositions ranging from pure PS to a 4.5:5.5 ratio of PS to PI are fabricated. The thin films are deformed under compression, tension, and cyclic loadings, while monitoring the behavior utilizing a micromechanical stage and optical microscopy. To calculate the plane strain modulus, a strain‐induced elastic buckling instability technique is employed. The results show that as the PI concentration increases, the plane strain modulus of the films decreases while the fracture strain increases. For the 4.5:5.5 ratio of PS to PI with a continuous rubbery PI phase, the thin films show major recoverable mechanical performance. This behavior is attributed to the mechanical strength of glassy PS combined with the strain energy absorption capability of rubbery PI, enabling elastic recovery. These fundamental observations provide valuable insights for designing mechanically resilient thin films for coatings and flexible devices.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolystyrenesPolymersHemiterpenesButadienesPentanesMaterials Testing

Stichwörter der Autor:innen

elastic recoveryin situ mechanicspolymer blendpseudo‐bicontinuous morphologythin films

Substanzen

PolystyrenesPolymersHemiterpenesButadienesPentanes

Autor:innen und Institutionen

  • School of Materials Engineering, Purdue University, West Lafayette, IN, 47907, USA.
  • Environmental and Ecological Engineering, Purdue University, West Lafayette, IN, 47907, USA.
  • Department of Mechanical Engineering, University of Delaware, Newark, DE, 19716, USA.
  • Department of Materials Science and Engineering, University of Delaware, Newark, DE, 19716, USA.

ORCID-Profile: Geeta Pokhrel, Nicholas M Christ, John A Howarter, Chelsea S Davis

Förderung

  • Cooling Technologies Research Center
  • National Science Foundation Industry/University Cooperative Research Center at Purdue University

Zitieren

APA

Pokhrel, G., Jo, H., Christ, N. M., Son, H., Howarter, J. A., & Davis, C. S. (2025). Mechanical Deformation Behavior of Polymer Blend Thin Films. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400736

Vancouver

Pokhrel G, Jo H, Christ NM, Son H, Howarter JA, Davis CS. Mechanical Deformation Behavior of Polymer Blend Thin Films. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202400736

BibTeX
@article{Pokhrel2025,
  author = {Pokhrel, Geeta and Jo, Hyungyung and Christ, Nicholas M and Son, Hyeyoung and Howarter, John A and Davis, Chelsea S},
  title = {Mechanical Deformation Behavior of Polymer Blend Thin Films},
  journal = {Macromolecular Rapid Communications},
  year = {2025},
  doi = {10.1002/marc.202400736}
}
Kostenlos starten →