EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Engineering of Polymeric Colloidal Crystals by Temperature – Pressure Annealing

Jeena Varghese iD, Visnja Babacic iD, Mikolaj Pochylski iD, Jacek Gapinski iD, Hans-Juergen Butt iD, George Fytas iD, Bartlomiej Graczykowski iD

Macromolecular Rapid Communications · 2024

DOI: 10.1002/marc.202400668 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024. Verfasst von Jeena Varghese und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Physics, Adam Mickiewicz University, Uniwersytetu Poznanskiego 2, Poznan, 61-614, Poland. Hauptthemen laut MEDLINE: Colloids, Polymers, Pressure, Temperature. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowe Centrum Nauki.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer colloidal crystals (PCCs) have been widely explored as acoustic and optical metamaterials and as templates for nanolithography. However, fabrication impurities and fragility of the self‐assembled structures are critical bottlenecks for the device's efficiency and applications. We have demonstrated that temperature‐assisted pressure [ annealing results in the mechanical strengthening of PCCs, which improves with the annealing temperature. Here, the enhancement of elastic properties and morphological features of self‐assembled PCC's is evaluated using Brillouin light scattering and scanning electron microscopy. The pressure‐induced effects on the vibrational modes of PCCs are also illustrated at temperatures well below the polymer glass transition. While the PCCs colloid constituents display reversibility, the PCC material is strongly irreversible in the performed thermodynamic cycle. The effective elastic modulus enhances from 0.7 GPa for the pristine sample to 0.8 GPa, solely by pressure annealing at room temperature. [ annealing at higher temperatures leads to a maximum effective elastic modulus of 1.7 GPa, more than twice the value in the pristine sample. Above a cross‐over pressure, 725 bar at 348 K), the PCCs respond elastically and, hence, reversibly to pressure changes.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ColloidsPolymersPressureTemperatureSurface PropertiesCrystallizationParticle Size

Stichwörter der Autor:innen

brillouin light scatteringpolymer colloidal crystalspolystyrene nanoparticlesspheroidal lamb modestemperature‐pressure annealing

Substanzen

ColloidsPolymers

Autor:innen und Institutionen

  • Faculty of Physics, Adam Mickiewicz University, Uniwersytetu Poznanskiego 2, Poznan, 61-614, Poland.
  • Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany.
  • Institute of Electronic Structure and Laser, F.O.R.T.H, N. Plastira 100, Heraklion, 70013, Greece.

ORCID-Profile: Jeena Varghese, Visnja Babacic, Mikolaj Pochylski, Jacek Gapinski, Hans-Juergen Butt, George Fytas, Bartlomiej Graczykowski

Förderung

  • Narodowe Centrum Nauki

Zitieren

APA

Varghese, J., Babacic, V., Pochylski, M., Gapinski, J., Butt, H. J., Fytas, G., & Graczykowski, B. (2024). Surface Engineering of Polymeric Colloidal Crystals by Temperature – Pressure Annealing. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400668

Vancouver

Varghese J, Babacic V, Pochylski M, Gapinski J, Butt HJ, Fytas G, et al. Surface Engineering of Polymeric Colloidal Crystals by Temperature – Pressure Annealing. Macromolecular Rapid Communications. 2024. doi:10.1002/marc.202400668

BibTeX
@article{Varghese2024,
  author = {Varghese, Jeena and Babacic, Visnja and Pochylski, Mikolaj and Gapinski, Jacek and Butt, Hans-Juergen and Fytas, George and Graczykowski, Bartlomiej},
  title = {Surface Engineering of Polymeric Colloidal Crystals by Temperature – Pressure Annealing},
  journal = {Macromolecular Rapid Communications},
  year = {2024},
  doi = {10.1002/marc.202400668}
}
Kostenlos starten →