Investigation on Polyether Sulfone Toughening Epoxy Vitrimer: Curing and Dynamic Properties
Macromolecular Rapid Communications · 2024
DOI: 10.1002/marc.202400540 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024. Verfasst von Xiang Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Structural Analysis, Optimization and CAE Software for Industrial Equipment, National Engineering Research Center for Advance…. Hauptthemen laut MEDLINE: Sulfones, Epoxy Resins, Polymers. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: fundRefName="National Key Research and Development Program of China" funderDoi="10.13039/501100012166">National Key R&D Program of China, Shenzhen Science and Technology Innovation Program.
Abstract (Originalsprache)
Diglycidyl ether of bisphenol A crosslinking with glutaric anhydride is used to form the conventional “covalent adaptive network”, polyether sulfone (PES) by coiling and aggregating on the adaptive network is used to significantly increase the uncured resin viscosity for improving the processability of epoxy resin, but inevitably affecting the curing reaction and dynamic transesterification reaction. This study investigates the crucial roles of PES in curing dynamics and stress relaxation behavior. The results indicate that although PES does not directly participate in the crosslinking reaction of polyester‐based epoxy vitrimers. Moreover, the isothermal curing studies reveal that the addition of PES can greatly bring forward the reaction rate peak from conversion α = 0.6 to α = 0.2, meaning that the curing mechanism transfers from chemical control to diffusion control. Dynamic property analysis shows that the addition of PES significantly accelerates stress relaxation, especially at lower temperatures, leading to low viscous flow activation energy E τ and relatively insensitive stress relaxation behavior to temperature. Introducing PES into vitrimer resin greatly improves crosslinking density (2.31 × 10⁴ mol m − 3 ), enhancing glass transition temperature (82.68 °C), tensile strength (68.66 MPa), and fracture toughness (6.25%). Additionally, the modified vitrimer resin exhibits satisfying shape memory performance and reprocessing capability.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Structural Analysis, Optimization and CAE Software for Industrial Equipment, National Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou, 4500…
ORCID-Profile: Yuezhan Feng
Förderung
- fundRefName="National Key Research and Development Program of China" funderDoi="10.13039/501100012166">National Key R&D Program of China
- Shenzhen Science and Technology Innovation Program
Zitieren
APA
Liu, X., Fang, M., Feng, Y., Huang, M., Liu, C., & Shen, C. (2024). Investigation on Polyether Sulfone Toughening Epoxy Vitrimer: Curing and Dynamic Properties. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400540
Vancouver
Liu X, Fang M, Feng Y, Huang M, Liu C, Shen C. Investigation on Polyether Sulfone Toughening Epoxy Vitrimer: Curing and Dynamic Properties. Macromolecular Rapid Communications. 2024. doi:10.1002/marc.202400540
BibTeX
@article{Liu2024,
author = {Liu, Xiang and Fang, Mei and Feng, Yuezhan and Huang, Ming and Liu, Chuntai and Shen, Changyu},
title = {Investigation on Polyether Sulfone Toughening Epoxy Vitrimer: Curing and Dynamic Properties},
journal = {Macromolecular Rapid Communications},
year = {2024},
doi = {10.1002/marc.202400540}
}
EUVIMED