The Trade‐Off between Dechlorination and Polymerization for Facile Fabrication of Electronic Grade Epoxidized Cardol
Macromolecular Rapid Communications · 2025
DOI: 10.1002/marc.202400489 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2025. Verfasst von Fengyan Zhang und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu, 210009, …. Hauptthemen laut MEDLINE: Polymerization, Chlorine. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
The dechlorination of epoxidized Cardol (E‐Cardol), which is a high‐performance and sustainable adhesive and packaging material for electronics, remains challenging. The previous work proposed a new alcohol‐sodium refining method to efficiently remove the chlorine of E‐Cardol. However, this method is strongly limited by the trade‐off between the dechlorination efficiency and its polymerization side effect, which leads to the viscosity as well as the epoxy equivalent increase of E‐Cardol. Based on the detailed analysis of the refining process using fourier transform infrared spectroscopy (FTIR), simultaneous thermal analysis (STA), and nuclear magnetic resonance spectrometer (NMR) epoxidized Cardol (E‐Cardol), this trade‐off is studied. It is found that the dechlorination efficiency increases with the increase of the usage of the alcohol sodium. Meanwhile, when the residual alcohol‐sodium content after refining exceeds 3000 ppm, the viscosity of the E‐Cardol increases significantly due to the increased polymerization of E‐Cardol by epoxy ring‐opening reaction. It is demonstrated that the alcohol‐sodium refining method can efficiently reduce the chlorine content of E‐Cardol with the initial hydrolyzable chlorine content not higher than 3000 ppm to below 300 ppm without influencing their epoxy equivalent and viscosity. This paper thoroughly explores the mechanism and application range of the proposed alcohol‐sodium refining method, which is crucial for the facile preparation of electronic‐grade E‐Cardol materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing, Jiangsu, 210009, P. R. China.
- College of Chemical Engineering, Co-Innovation Center for Efficient Processing and Utilization of Forest Products, Nanjing Forestry University, Nanjing, Jiangsu, 210037, P. R. China.
- School of Materials Science and Engineering, Zhejiang University, Hangzhou, Zhejiang, 310027, P. R. China.
ORCID-Profile: Liangyong Chu
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Zhang, F., Tian, Z., Chu, L., Lv, W., Shen, L., Zhang, X., Li, X., & Bao, N. (2025). The Trade‐Off between Dechlorination and Polymerization for Facile Fabrication of Electronic Grade Epoxidized Cardol. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400489
Vancouver
Zhang F, Tian Z, Chu L, Lv W, Shen L, Zhang X, et al. The Trade‐Off between Dechlorination and Polymerization for Facile Fabrication of Electronic Grade Epoxidized Cardol. Macromolecular Rapid Communications. 2025. doi:10.1002/marc.202400489
BibTeX
@article{Zhang2025,
author = {Zhang, Fengyan and Tian, Zihao and Chu, Liangyong and Lv, Wenxiao and Shen, Liming and Zhang, Xiaoyan and Li, Xiaobao and Bao, Ningzhong},
title = {The Trade‐Off between Dechlorination and Polymerization for Facile Fabrication of Electronic Grade Epoxidized Cardol},
journal = {Macromolecular Rapid Communications},
year = {2025},
doi = {10.1002/marc.202400489}
}
EUVIMED