EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Rapidly Self‐Healable and Melt‐Extrudable Polyethylene Reprocessable Network Enabled with Dialkylamino Disulfide Dynamic Chemistry

Boran Chen iD, Tapas Debsharma, Logan M Fenimore iD, Tong Wang, Yixuan Chen, Nathan S Purwanto, John M Torkelson iD

Macromolecular Rapid Communications · 2024

DOI: 10.1002/marc.202400460 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024. Verfasst von Boran Chen und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biological Engineering, Northwestern University, Evanston, IL, 60208, USA. Hauptthemen laut MEDLINE: Disulfides, Polyethylene. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Dow Chemical Company, Graduate Research Fellowship.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Catalyst‐free, radical‐based reactive processing is used to transform low‐density polyethylene (LDPE) into polyethylene covalent adaptable networks (PE CANs) using a dialkylamino disulfide crosslinker, BiTEMPS methacrylate (BTMA). Two versions of BTMA are used, BTMA‐S 2 , with nearly exclusively disulfide bridges, and BTMA‐S n , with a mixture of oligosulfide bridges, to produce S 2 PE CAN and S n PE CAN, respectively. The two PE CANs exhibit identical crosslink densities, but the S 2 PE CAN manifests faster stress relaxation, with average relaxation times ∼4.5 times shorter than those of S n PE CAN over a 130 to 160 °C temperature range. The more rapid dynamics of the S 2 PE CAN translate into a shorter compression‐molding reprocessing time at 160 °C of only 5 min (vs 30 min for the S n PE CAN) to achieve full recovery of crosslink density. Both PE CANs are melt‐extrudable and exhibit full recovery within experimental uncertainty of crosslink density after extrusion. Both PE CANs are self‐healable, with a crack fully repaired and the original tensile properties restored after 30 min for the S 2 PE CAN or 60 min for the S n PE CAN at a temperature slightly above the LDPE melting point and without the assistance of external forces.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

DisulfidesPolyethyleneTemperatureMolecular StructureMethacrylatesCross-Linking Reagents

Stichwörter der Autor:innen

covalent adaptable networkcrosslinked polyethylenedialkylamino disulfidedynamic covalent chemistrymelt extrusionself‐healing

Substanzen

DisulfidesPolyethyleneMethacrylatesCross-Linking Reagents

Autor:innen und Institutionen

  • Department of Chemical and Biological Engineering, Northwestern University, Evanston, IL, 60208, USA.
  • Department of Chemistry, Indian Institute of Technology Kharagpur, Kharagpur, 721302, India.
  • Department of Materials Science and Engineering, Northwestern University, Evanston, IL, 60208, USA.

ORCID-Profile: Boran Chen, Logan M Fenimore, John M Torkelson

Förderung

  • Dow Chemical Company
  • Graduate Research Fellowship

Zitieren

APA

Chen, B., Debsharma, T., Fenimore, L. M., Wang, T., Chen, Y., Purwanto, N. S., & Torkelson, J. M. (2024). Rapidly Self‐Healable and Melt‐Extrudable Polyethylene Reprocessable Network Enabled with Dialkylamino Disulfide Dynamic Chemistry. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400460

Vancouver

Chen B, Debsharma T, Fenimore LM, Wang T, Chen Y, Purwanto NS, et al. Rapidly Self‐Healable and Melt‐Extrudable Polyethylene Reprocessable Network Enabled with Dialkylamino Disulfide Dynamic Chemistry. Macromolecular Rapid Communications. 2024. doi:10.1002/marc.202400460

BibTeX
@article{Chen2024,
  author = {Chen, Boran and Debsharma, Tapas and Fenimore, Logan M and Wang, Tong and Chen, Yixuan and Purwanto, Nathan S and Torkelson, John M},
  title = {Rapidly Self‐Healable and Melt‐Extrudable Polyethylene Reprocessable Network Enabled with Dialkylamino Disulfide Dynamic Chemistry},
  journal = {Macromolecular Rapid Communications},
  year = {2024},
  doi = {10.1002/marc.202400460}
}
Kostenlos starten →