How Depolymerization‐Based Plasticization Affects the Process of Cold Crystallization in Poly(P‐Dioxanone)
Macromolecular Rapid Communications · 2024
DOI: 10.1002/marc.202400369 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024. Verfasst von Roman Svoboda und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physical Chemistry, Faculty of Chemical Technology, University of Pardubice, Studentská 573, Pardubice, 53210, Czech Republic. Hauptthemen laut MEDLINE: Crystallization, Polymerization, Polymers, Dioxanes. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 72 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Youth and Sports of the Czech Republic.
Abstract (Originalsprache)
The self‐plasticization, i.e., the increase in the polymer chains' mobility by including its monomer, has a major impact on a polymer's structural, thermal, and mechanical properties. In this study, differential scanning calorimetry (DSC), optical and Raman microscopies, thermo‐mechanical analysis (TMA), size exclusion chromatography equipped with a multi‐angle light scattering detector (SEC‐MALS), and X‐ray diffraction analysis (XRD) are used to investigate the effect of thermally induced self‐plasticization of poly‐( p ‐dioxanone), PDX, on the crystal growths from the amorphous and molten states. Significant changes in the crystallization behavior and mechanical properties of PDX are found only for samples self‐plasticized at the depolymerization temperature ( T d ) above 150 °C. The intense self‐plasticization leads to the decrease of the crystallization temperature, increase of the crystal growth rapidity, disappearance of the distinct α→α’ polymorphic transition, reduction of the overall melting temperature, and segregation of the redundant monomer. Although the morphology of the crystalline phase has a major impact on the mechanical properties of PDX, the self‐plasticization itself does not seem to result in any major changes in the magnitude, localization, or morphology of formed crystallites (these are primarily driven by the temperature of crystal growth). The manifestation of the variable activation energy concept is discussed for the present crystallization data.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Physical Chemistry, Faculty of Chemical Technology, University of Pardubice, Studentská 573, Pardubice, 53210, Czech Republic.
- Institute of Chemistry and Technology of Macromolecular Materials, Faculty of Chemical Technology, University of Pardubice, Studentská 573, Pardubice, 53210, Czech Republic.
ORCID-Profile: Jana Machotová
Förderung
- Ministry of Education, Youth and Sports of the Czech Republic
Zitieren
APA
Svoboda, R., & Machotová, J. (2024). How Depolymerization‐Based Plasticization Affects the Process of Cold Crystallization in Poly(P‐Dioxanone). Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202400369
Vancouver
Svoboda R, Machotová J. How Depolymerization‐Based Plasticization Affects the Process of Cold Crystallization in Poly(P‐Dioxanone). Macromolecular Rapid Communications. 2024. doi:10.1002/marc.202400369
BibTeX
@article{Svoboda2024,
author = {Svoboda, Roman and Machotová, Jana},
title = {How Depolymerization‐Based Plasticization Affects the Process of Cold Crystallization in Poly(P‐Dioxanone)},
journal = {Macromolecular Rapid Communications},
year = {2024},
doi = {10.1002/marc.202400369}
}
EUVIMED