Thermally Stable and Transparent Polyimide Derived from Side‐Group‐Regulated Spirobifluorene Unit for Substrate Application
Macromolecular Rapid Communications · 2024-09 · 45 (17)
DOI: 10.1002/marc.202400245 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, online erschienen am 16.07.2024. Verfasst von Yunzhi Fang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shan…. Hauptthemen laut MEDLINE: Fluorenes, Imides. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Advancements in flexible electronic technology, especially the progress in foldable displays and under‐display cameras (UDC), have created an urgent demand for high‐performance colorless polyimide (CPI). However, current CPIs lack sufficient heat resistance for substrate applications. In this work, four kinds of rigid spirobifluorene diamines are designed, and the corresponding polyimides are prepared by their condensation with 5,5′‐(perfluoropropane‐2,2‐diyl) bis(isobenzofuran‐1,3‐dione) (6FDA) or 9,9‐bis(3,4‐dicarboxyphenyl) fluorene dianhydride (BPAF). The rigid and conjugated spirobifluorene units endow the polyimides with higher glass transition temperature ( T g ) ranging from 356 to 468 °C. Their optical properties are regulated by small side groups and spirobifluorene structure with a periodically twisted molecular conformation. Consequently, a series of CPIs with an average transmittance ranging from 75% to 88% and a yellowness index (YI) as low as 2.48 are obtained. Among these, 27SPFTFA‐BPAF presents excellent comprehensive performance, with a T g of 422 °C, a 5 wt.% loss temperature ( T d5 ) of 562 °C, a YI of 3.53, and a tensile strength (δ max ) of 140 MPa, respectively. The mechanism underlying the structure‐property relationship is investigated by experimental comparison and theoretical calculation, and the proposed method provides a pathway for designing highly rigid conjugated CPIs with excellent thermal stability and transparency for photoelectric engineering.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School of Chemistry and Chemical Engineering, Shanghai Key Laboratory of Electrical Insulation and Thermal Aging, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China.
- School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, P. R. China.
- Qinghai Institute of Salt Lakes, Key Laboratory of Green and High-End Utilization of Salt Lake Resources, Chinese Academy of Sciences, Xining, 810008, P. R. China.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Fang, Y., Lu, X., Xiao, J., Zhang, S. Y., & Lu, Q. (2024). Thermally Stable and Transparent Polyimide Derived from Side‐Group‐Regulated Spirobifluorene Unit for Substrate Application. Macromolecular Rapid Communications, 45(17). https://doi.org/10.1002/marc.202400245
Vancouver
Fang Y, Lu X, Xiao J, Zhang SY, Lu Q. Thermally Stable and Transparent Polyimide Derived from Side‐Group‐Regulated Spirobifluorene Unit for Substrate Application. Macromolecular Rapid Communications. 2024;45(17). doi:10.1002/marc.202400245
BibTeX
@article{Fang2024,
author = {Fang, Yunzhi and Lu, Xuemin and Xiao, Junjie and Zhang, Shu-Yu and Lu, Qinghua},
title = {Thermally Stable and Transparent Polyimide Derived from Side‐Group‐Regulated Spirobifluorene Unit for Substrate Application},
journal = {Macromolecular Rapid Communications},
year = {2024},
volume = {45},
number = {17},
doi = {10.1002/marc.202400245}
}
EUVIMED