The Shear‐Accelerated II–I Phase Transition of Isotactic Poly(1‐Butene)
Macromolecular Rapid Communications · 2024-07 · 45 (14)
DOI: 10.1002/marc.202400102 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024-05. Verfasst von Rui Jin und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, 100029, P. R. China. Hauptthemen laut MEDLINE: Phase Transition. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The II–I phase transition of isotactic poly(1‐butene) (iPBu) leads to improved mechanical performance. However, this will take several weeks and increase storage and processing costs. In this work, shear forces are introduced into the supercooled iPBu melt, and the effects of isothermal crystallization temperature ( T c ) and shear temperature ( T shear ) on crystallization and phase transition are explored. Shear‐induced transcrystalline morphology of Form II with a significantly shortened crystallization induction period can be observed at relatively high T c (105 °C). Besides, the shear‐induced Form II can transit to Form I faster than the unsheared one. In addition, the phase transition rate increases as the T shear decreases, with the fastest rate occurring at T shear of 120 °C. The half transition time ( t 1/2 ) is measured as 6.3 h when T c = 105 °C, T shear = 120 °C, which is much shorter than the 20.7 h required for unsheared samples. The accelerated phase transition of iPBu can be attributed to the stretching of molecular chains, resulting from shear treatment. This study provides a quantitative analysis of the influence of the shear treatment and the T shear on the II–I phase transition rate. It also presents a cost‐effective and straightforward approach for expediting the phase transition process.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, 100029, P. R. China.
- Key Laboratory of Rubber-Plastics, Ministry of Education, Qingdao University of Science and Technology, Qingdao, 266042, P. R. China.
ORCID-Profile: Xiaoli Sun
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Jin, R., Xin, R., Zhang, X., Li, Y., Yang, H., Yan, S., & Sun, X. (2024). The Shear‐Accelerated II–I Phase Transition of Isotactic Poly(1‐Butene). Macromolecular Rapid Communications, 45(14). https://doi.org/10.1002/marc.202400102
Vancouver
Jin R, Xin R, Zhang X, Li Y, Yang H, Yan S, et al. The Shear‐Accelerated II–I Phase Transition of Isotactic Poly(1‐Butene). Macromolecular Rapid Communications. 2024;45(14). doi:10.1002/marc.202400102
BibTeX
@article{Jin2024,
author = {Jin, Rui and Xin, Rui and Zhang, Xinyan and Li, Yunpeng and Yang, Huiyu and Yan, Shouke and Sun, Xiaoli},
title = {The Shear‐Accelerated II–I Phase Transition of Isotactic Poly(1‐Butene)},
journal = {Macromolecular Rapid Communications},
year = {2024},
volume = {45},
number = {14},
doi = {10.1002/marc.202400102}
}
EUVIMED