EUVIMEDEUVIMED entdecken
Crossref

A Solar Evaporator Based on Polypyrrole Coated 3D Carbon Nanotube Materials for Efficient Solar‐Driven Vapor Generation

Hao Xun, Chuang Wang, Zhaohui Yang iD, Xiaohua Zhang iD

Macromolecular Rapid Communications · 2024

DOI: 10.1002/marc.202300744 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024. Verfasst von Hao Xun und 3 weiteren Autor:innen. Beteiligte Einrichtung: Center for Soft Condensed Matter Physics and Interdisciplinary Research & School of Physical Science and Technology, Soochow University, Suzhou, 2150…. Hauptthemen laut MEDLINE: Nanotubes, Carbon, Polymers, Pyrroles. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: Specially Appointed Professor Plan in Jiangsu Province, Priority Academic Program Development of Jiangsu Higher Education Institutions.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Highly porous light absorbers are fabricated based on polypyrrole (PPy)‐coated carbon nanotube (CNT). Carbon nanotube sponge (CNTS) or carbon nanotube array (CNTA) with three‐dimensional (3D) network structure is the framework of porous light absorbers. Both PPy@CNTS and PPy@CNTA composites exhibit excellent light absorption of the full solar spectrum. The CNTS and CNTA with porous structures have extremely large effective surface area for light absorption and for water evaporation that has great practical benefit to the solar‐driven vapor generation. The PPy layer on CNT sidewalls significantly improves the hydrophilicity of porous CNTS and CNTA. The good wettability of water on CNT sidewalls makes water transport in porous CNT materials highly efficient. The PPy@CNTS and PPy@CNTA light absorbers achieve high water evaporation rates of 3.35 and 3.41 kg m −2 h −1 , respectively, under 1‐sun radiation. The orientation of nano channels in CNTA‐based light absorbers also plays an important role in the solar‐driven vapor generation. The water transport and vapor escape are more efficient in CNTA‐based light absorbers as compared to the CNTS‐based light absorbers due to the relatively short path for the water transport and the vapor escape in CNTA‐based light absorbers.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Nanotubes, CarbonPolymersPyrrolesSolar EnergySunlightPorosityWaterSurface PropertiesParticle Size

Stichwörter der Autor:innen

PPy‐coated carbon nanotubeelectro‐polymerizationporous light absorberseawater desalinationvapor generation

Substanzen

Nanotubes, CarbonpolypyrrolePolymersPyrrolesWater

Autor:innen und Institutionen

  • Center for Soft Condensed Matter Physics and Interdisciplinary Research & School of Physical Science and Technology, Soochow University, Suzhou, 215006, P. R. China.
  • Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou, 215006, P. R China.

ORCID-Profile: Zhaohui Yang, Xiaohua Zhang

Förderung

  • Specially Appointed Professor Plan in Jiangsu Province
  • Priority Academic Program Development of Jiangsu Higher Education Institutions

Zitieren

APA

Xun, H., Wang, C., Yang, Z., & Zhang, X. (2024). A Solar Evaporator Based on Polypyrrole Coated 3D Carbon Nanotube Materials for Efficient Solar‐Driven Vapor Generation. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202300744

Vancouver

Xun H, Wang C, Yang Z, Zhang X. A Solar Evaporator Based on Polypyrrole Coated 3D Carbon Nanotube Materials for Efficient Solar‐Driven Vapor Generation. Macromolecular Rapid Communications. 2024. doi:10.1002/marc.202300744

BibTeX
@article{Xun2024,
  author = {Xun, Hao and Wang, Chuang and Yang, Zhaohui and Zhang, Xiaohua},
  title = {A Solar Evaporator Based on Polypyrrole Coated 3D Carbon Nanotube Materials for Efficient Solar‐Driven Vapor Generation},
  journal = {Macromolecular Rapid Communications},
  year = {2024},
  doi = {10.1002/marc.202300744}
}
Kostenlos starten →