Sulfonated Polyimide Membranes Constructed by Main‐Chain and Molecular‐Network Engineering Strategy for Direct Methanol Fuel Cell
Macromolecular Rapid Communications · 2024
DOI: 10.1002/marc.202300502 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2024. Verfasst von Hang Fan und 8 weiteren Autor:innen. Beteiligte Einrichtung: National and Local Joint Engineering Laboratory for Synthesis Technology of High Performance Polymer, Key Laboratory of High Performance Plastics, Mi…. Hauptthemen laut MEDLINE: Benzene, Methanol. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 24 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jilin Province, Changchun Scientific and Technological Program.
Abstract (Originalsprache)
Excessive swelling is one important factor that leads to high fuel permeability and limited operating concentration of methanol for proton exchange membranes. Herein, a collaborative strategy of main‐chain and molecular‐network engineering is applied to lower swelling ratio and improve methanol resistance for highly sulfonated polyimide. Two m ‐phenylenediamine monomers (4‐(2,3,5,6‐tetrafluoro‐4‐vinylphenoxy)benzene‐1,3‐diamine and 4,6‐bis(2,3,5,6‐tetrafluoro‐4‐vinylphenoxy)benzene‐1,3‐diamine) with tetrafluorostyrol groups are designed and synthesized. Two series of cross‐linked sulfonated polyimides (CSPI‐Ts, CSPI‐Bs) are prepared from the two diamines, 4,4′‐diaminostilbene‐2,2′‐disulfonic acid and 1,4,5,8‐naphthalenetetracarboxylicdianhydride. The rigid main‐chain structure is cornerstone for wet CSPI‐Ts and CSPI‐Bs remaining stable at elevated temperatures. The introduction of hydrophobic cross‐linked network further improves their dimensional stability and methanol resistance. CSPI‐Ts and CSPI‐Bs show obviously improved performances containing high proton conductivity (121 ± 0.27–158 ± 0.35 S cm −1 ), low swelling ratio (9.6 ± 0.40%–16.1 ± 0.01%) and methanol permeability (4.14–7.69 × 10 −7 cm 2 s −1 ) at 80 °C. The direct methanol fuel cell (DMFC) is assembled from CSPI‐T‐10 with balanced properties, and it exhibits high maximum power density (PD max ) of 82.3 and 72.6 mW cm −2 in 2 and 10 m methanol solution, respectively. The ratio of PD max in 10 m methanol solution to the value in 2 m methanol solution is as high as 88%. The CSPI‐T‐10 is promising proton exchange membrane candidate for DMFC application.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- National and Local Joint Engineering Laboratory for Synthesis Technology of High Performance Polymer, Key Laboratory of High Performance Plastics, Ministry of Education, College of Chemistry, Jilin University, Qianjin S…
- Guangzhou High-tech Zone Institute for Energy Technology Co., Ltd, Hongyuan Road 8, Guangzhou, 510700, P. R. China.
ORCID-Profile: Hongyan Yao
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jilin Province
- Changchun Scientific and Technological Program
- Jilin Scientific and Technological Development Program
Zitieren
APA
Fan, H., Xie, T., Pang, Y., Zhu, S., Feng, P., Zhu, X., Zhao, C., Guan, S., & Yao, H. (2024). Sulfonated Polyimide Membranes Constructed by Main‐Chain and Molecular‐Network Engineering Strategy for Direct Methanol Fuel Cell. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202300502
Vancouver
Fan H, Xie T, Pang Y, Zhu S, Feng P, Zhu X, et al. Sulfonated Polyimide Membranes Constructed by Main‐Chain and Molecular‐Network Engineering Strategy for Direct Methanol Fuel Cell. Macromolecular Rapid Communications. 2024. doi:10.1002/marc.202300502
BibTeX
@article{Fan2024,
author = {Fan, Hang and Xie, Tiantian and Pang, Yang and Zhu, Shiyang and Feng, Pengju and Zhu, Xuanbo and Zhao, Chengji and Guan, Shaowei and Yao, Hongyan},
title = {Sulfonated Polyimide Membranes Constructed by Main‐Chain and Molecular‐Network Engineering Strategy for Direct Methanol Fuel Cell},
journal = {Macromolecular Rapid Communications},
year = {2024},
doi = {10.1002/marc.202300502}
}
EUVIMED