Modification of 3D‐Printed PLA Structures Using Photo‐Iniferter Polymerization: Toward On‐Demand Antimicrobial Water Filters
Macromolecular Rapid Communications · 2023
DOI: 10.1002/marc.202300408 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2023. Verfasst von Anne-Catherine Lehnen und 9 weiteren Autor:innen. Beteiligte Einrichtung: University of Potsdam, Institute of Chemistry, Karl-Liebknecht-Straße 24-25, D-14476, Potsdam, Germany. Hauptthemen laut MEDLINE: Water, Anti-Infective Agents. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, University of Potsdam, Universität Potsdam.
Abstract (Originalsprache)
Water filtration is an important application to ensure the accessibility of clean drinking water. As requirements and contaminants vary on a local level, adjustable filter devices and their evaluation with contaminants are required. Within this work, modular filter devices are designed featuring an adjustable surface functionalization. For this purpose, 3D‐printed structures are created consisting of bio‐based poly(lactic acid) (PLA) that are manufactured by extrusion printing. The surface of PLA is activated with amino groups that are used to install xanthates as chain transfer agents. Subsequently, photo‐iniferter (PI) polymerization is used to create cationic polymer brushes on the surface of PLA substrates. Multiple surface characterization techniques are employed to prove successful growth of polymer brushes on PLA. After initial optimization studies on flat surfaces, filter devices are printed, functionalized, and used to remove bacteria from contaminated water. Significant reduction of the number of microorganisms is detected after filtration (single filtration or cycling) and contaminating organism can also be removed from freshwater samples by simple incubation with a 3D‐printed filter. The herein developed setup for producing functional filter devices and probing their performance in affinity filtration is a useful platform technology, enabling the rapid testing of polymer brushes for such applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- University of Potsdam, Institute of Chemistry, Karl-Liebknecht-Straße 24-25, D-14476, Potsdam, Germany.
- Fraunhofer Institute for Applied Polymer Research IAP, Geiselbergstraße 69, 14476, Potsdam-Golm, Germany.
- Molecular Biotechnology, Institute of Biochemistry and Biology, University of Potsdam, Karl-Liebknecht-Str. 24-25, 14476, Potsdam, Germany.
ORCID-Profile: Anne-Catherine Lehnen, Stefan Reinicke, Martin Reifarth, Andreas Taubert, Katja M Arndt, Matthias Hartlieb
Förderung
- Deutsche Forschungsgemeinschaft
- University of Potsdam
- Universität Potsdam
Zitieren
APA
Lehnen, A. C., Hanke, S., Schneider, M., Radelof, C. M. L., Perestrelo, J., Reinicke, S., Reifarth, M., Taubert, A., Arndt, K. M., & Hartlieb, M. (2023). Modification of 3D‐Printed PLA Structures Using Photo‐Iniferter Polymerization: Toward On‐Demand Antimicrobial Water Filters. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202300408
Vancouver
Lehnen AC, Hanke S, Schneider M, Radelof CML, Perestrelo J, Reinicke S, et al. Modification of 3D‐Printed PLA Structures Using Photo‐Iniferter Polymerization: Toward On‐Demand Antimicrobial Water Filters. Macromolecular Rapid Communications. 2023. doi:10.1002/marc.202300408
BibTeX
@article{Lehnen2023,
author = {Lehnen, Anne-Catherine and Hanke, Sebastian and Schneider, Matthias and Radelof, Charlotte M L and Perestrelo, Joana and Reinicke, Stefan and Reifarth, Martin and Taubert, Andreas and Arndt, Katja M and Hartlieb, Matthias},
title = {Modification of 3D‐Printed PLA Structures Using Photo‐Iniferter Polymerization: Toward On‐Demand Antimicrobial Water Filters},
journal = {Macromolecular Rapid Communications},
year = {2023},
doi = {10.1002/marc.202300408}
}
EUVIMED