EUVIMEDEUVIMED entdecken
Crossref

Fabrication of Highly Thermally Resistant and Self‐Healing Polysiloxane Elastomers by Constructing Covalent and Reversible Networks

Yuanbo Cai, Yuan Wang, Lu Long, Shengtai Zhou, Liwei Yan, Junhua Zhang, Huawei Zou iD

Macromolecular Rapid Communications · 2023

DOI: 10.1002/marc.202300191 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2023. Verfasst von Yuanbo Cai und 6 weiteren Autor:innen. Beteiligte Einrichtung: The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, 610065, China. Hauptthemen laut MEDLINE: Elastomers, Siloxanes. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: National Natural Science Foundation of China, State Key Laboratory of Polymer Materials Engineering, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fabrication of self‐healing elastomers with high thermal stability for use in extreme thermal conditions such as aerospace remains a major challenge. A strategy for preparing self‐healing elastomers with stable covalent bonds and dynamic metal–ligand coordination interactions as crosslinking sites in polydimethylsiloxane (PDMS) is proposed. The added Fe (III) not only serves as the dynamic crosslinking point at room temperature which is crucial for self‐healing performance, but also plays a role as free radical scavenging agent at high temperatures. The results show that the PDMS elastomers possessed an initial thermal degradation temperature over 380 °C and a room temperature self‐healing efficiency as high as 65.7%. Moreover, the char residue at 800 °C of PDMS elastomer reaches 7.19% in nitrogen atmosphere, and up to 14.02% in air atmosphere by doping a small amount (i.e., 0.3 wt%) of Fe (III), which is remarkable for the self‐healing elastomers that contain weak and dynamic bonds with relatively poor thermal stability. This study provides an insight into designing self‐healing PDMS‐based materials that can be targeted for use as high‐temperature thermal protection coatings.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ElastomersSiloxanesTemperatureDimethylpolysiloxanes

Stichwörter der Autor:innen

crosslinked elastomersorganosiliconself-healingthermal degradation mechanismthermal protection coatings

Substanzen

ElastomersSiloxanesbaysilonDimethylpolysiloxanes

Autor:innen und Institutionen

  • The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu, 610065, China.

ORCID-Profile: Huawei Zou

Förderung

  • National Natural Science Foundation of China
  • State Key Laboratory of Polymer Materials Engineering
  • Fundamental Research Funds for the Central Universities

Zitieren

APA

Cai, Y., Wang, Y., Long, L., Zhou, S., Yan, L., Zhang, J., & Zou, H. (2023). Fabrication of Highly Thermally Resistant and Self‐Healing Polysiloxane Elastomers by Constructing Covalent and Reversible Networks. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202300191

Vancouver

Cai Y, Wang Y, Long L, Zhou S, Yan L, Zhang J, et al. Fabrication of Highly Thermally Resistant and Self‐Healing Polysiloxane Elastomers by Constructing Covalent and Reversible Networks. Macromolecular Rapid Communications. 2023. doi:10.1002/marc.202300191

BibTeX
@article{Cai2023,
  author = {Cai, Yuanbo and Wang, Yuan and Long, Lu and Zhou, Shengtai and Yan, Liwei and Zhang, Junhua and Zou, Huawei},
  title = {Fabrication of Highly Thermally Resistant and Self‐Healing Polysiloxane Elastomers by Constructing Covalent and Reversible Networks},
  journal = {Macromolecular Rapid Communications},
  year = {2023},
  doi = {10.1002/marc.202300191}
}
Kostenlos starten →