Enhancing Thermal Conductivity of hBN/SiC/PTFE Composites with Low Dielectric Properties via Pulse Vibration Molding
Macromolecular Rapid Communications · 2023
DOI: 10.1002/marc.202300136 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Rapid Communications, 2023. Verfasst von Yanhong Feng und 4 weiteren Autor:innen. Beteiligte Einrichtung: National Engineering Research Center of Novel Equipment for Polymer Processing, South China University of Technology, Guangzhou, 510640, P. R. China. Hauptthemen laut MEDLINE: Vibration, Polytetrafluoroethylene. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 54 Literaturangaben. Gefördert von: Natural Science Foundation of Guangdong Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
In order to enhance the thermal conductivity of polytetrafluoroethylene (PTFE)‐based composites, while maintaining relatively low dielectric constant and dielectric loss for high‐frequency and high‐speed applications, hexagonal boron nitride (hBN) and silicon carbide (SiC) compounded fillers are filled into the PTFE matrix. The hBN/SiC/PTFE composites are prepared by pulse vibration molding (PVM), and their subsequent thermal conductivities are comparatively investigated. The PVM process with controlled fluctuation in pressure (1 Hz square wave force, 0–20 MPa, at 150 °C) can reduce the sample porosity and surface defects, improve the orientation of hBN, and increase the thermal conductivity by 44.6% compared with that obtained by compression molding. When hBN:SiC (vol) is 3:1, the in‐plane thermal conductivity of the composite with 40 vol% filler content is ≈4.83 W m −1 K −1 , which is 40.3% higher than that of hBN/PTFE. Regarding the dielectric properties, hBN/SiC/PTFE maintains a low dielectric constant of 3.27 and a low dielectric loss of 0.0058. The dielectric constants of hBN/SiC/PTFE ternary composites are predicted by using different prediction models, among which the effective medium theory (EMT), is in good agreement with the experimental results. PVM shows great potential in the large‐scale preparation of thermal conductive composites for high‐frequency and high‐speed applications.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- National Engineering Research Center of Novel Equipment for Polymer Processing, South China University of Technology, Guangzhou, 510640, P. R. China.
- Key Laboratory of Polymer Processing Engineering, Ministry of Education, South China University of Technology, Guangzhou, 510640, P. R. China.
- Guangdong Provincial Key Laboratory of Technique and Equipment for Macromolecular Advanced Manufacturing, Guangzhou, 510640, P. R. China.
ORCID-Profile: Tao Chen
Förderung
- Natural Science Foundation of Guangdong Province
- National Natural Science Foundation of China
Zitieren
APA
Feng, Y., Chen, T., Gao, S., Yin, X., & Zhang, G. (2023). Enhancing Thermal Conductivity of hBN/SiC/PTFE Composites with Low Dielectric Properties via Pulse Vibration Molding. Macromolecular Rapid Communications. https://doi.org/10.1002/marc.202300136
Vancouver
Feng Y, Chen T, Gao S, Yin X, Zhang G. Enhancing Thermal Conductivity of hBN/SiC/PTFE Composites with Low Dielectric Properties via Pulse Vibration Molding. Macromolecular Rapid Communications. 2023. doi:10.1002/marc.202300136
BibTeX
@article{Feng2023,
author = {Feng, Yanhong and Chen, Tao and Gao, Shuo and Yin, Xiaochun and Zhang, Guizhen},
title = {Enhancing Thermal Conductivity of hBN/SiC/PTFE Composites with Low Dielectric Properties via Pulse Vibration Molding},
journal = {Macromolecular Rapid Communications},
year = {2023},
doi = {10.1002/marc.202300136}
}
EUVIMED