EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Influence of the Degree of Swelling on the Stiffness and Toughness of Microgel‐Reinforced Hydrogels

Michael Kessler, Tianyu Yuan iD, John M Kolinski, Esther Amstad iD

Macromolecular Rapid Communications · 2023-08 · 44 (16)

DOI: 10.1002/marc.202200864 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Rapid Communications, online erschienen am 10.03.2023. Verfasst von Michael Kessler und 3 weiteren Autor:innen. Beteiligte Einrichtung: Soft Materials Laboratory, Institute of Materials, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, 1015, Switzerland. Hauptthemen laut MEDLINE: Hydrogels, Microgels. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Swiss National Science Foundation (SNSF).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The stiffness and toughness of conventional hydrogels decrease with increasing degree of swelling. This behavior makes the stiffness‐toughness compromise inherent to hydrogels even more limiting for fully swollen ones, especially for load‐bearing applications. The stiffness‐toughness compromise of hydrogels can be addressed by reinforcing them with hydrogel microparticles, microgels, which introduce the double network (DN) toughening effect into hydrogels. However, to what extent this toughening effect is maintained in fully swollen microgel‐reinforced hydrogels (MRHs) is unknown. Herein, it is demonstrated that the initial volume fraction of microgels contained in MRHs determines their connectivity, which is closely yet nonlinearly related to the stiffness of fully swollen MRHs. Remarkably, if MRHs are reinforced with a high volume fraction of microgels, they stiffen upon swelling. By contrast, the fracture toughness linearly increases with the effective volume fraction of microgels present in the MRHs regardless of their degree of swelling. These findings provide a universal design rule for the fabrication of tough granular hydrogels that stiffen upon swelling and hence, open up new fields of use of these hydrogels.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HydrogelsMicrogels

Stichwörter der Autor:innen

granular materialsmechanical propertiesmicrogel-reinforced hydrogelssoft matters

Substanzen

HydrogelsMicrogels

Autor:innen und Institutionen

  • Soft Materials Laboratory, Institute of Materials, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, 1015, Switzerland.
  • Engineering Mechanics of Soft Interfaces Laboratory, Institute of Mechanical, Engineering, École Polytechnique Fédérale de Lausanne, (EPFL), Lausanne, 1015, Switzerland.

ORCID-Profile: Tianyu Yuan, Esther Amstad

Förderung

  • Swiss National Science Foundation (SNSF)

Zitieren

APA

Kessler, M., Yuan, T., Kolinski, J. M., & Amstad, E. (2023). Influence of the Degree of Swelling on the Stiffness and Toughness of Microgel‐Reinforced Hydrogels. Macromolecular Rapid Communications, 44(16). https://doi.org/10.1002/marc.202200864

Vancouver

Kessler M, Yuan T, Kolinski JM, Amstad E. Influence of the Degree of Swelling on the Stiffness and Toughness of Microgel‐Reinforced Hydrogels. Macromolecular Rapid Communications. 2023;44(16). doi:10.1002/marc.202200864

BibTeX
@article{Kessler2023,
  author = {Kessler, Michael and Yuan, Tianyu and Kolinski, John M and Amstad, Esther},
  title = {Influence of the Degree of Swelling on the Stiffness and Toughness of Microgel‐Reinforced Hydrogels},
  journal = {Macromolecular Rapid Communications},
  year = {2023},
  volume = {44},
  number = {16},
  doi = {10.1002/marc.202200864}
}
Kostenlos starten →