Membrane‐Electrode Co‐Engineering for Highly Responsive and Strong Ionic Polymer‐MXene Composite Actuators
Macromolecular Materials and Engineering · 2026-11 · 311 (11)
DOI: 10.1002/mame.70387 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 13.11.2026. Verfasst von Gwonmin Kim und 1 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea.
Abstract (Originalsprache)
Simultaneously achieving large deformation and high force generation remains a key challenge for ionic polymer actuators because performance depends on the interplay between ion transport and mechanical properties in the membrane and charge transport and storage in the electrodes. In this study, we developed a membrane‐electrode co‐engineering strategy by incorporating Ti 3 C 2 T x MXene into both the ionic polymer membrane and electrodes to distinguish their domain‐dependent contributions. Increasing the MXene content gradually reinforced the membrane, while ionic conductivity peaked at 5 wt.%, revealing a composition‐dependent balance between ion transport and mechanical stiffness. Incorporation of MXene into the PEDOT:PSS electrodes also substantially enhanced electrochemical charge storage. The actuator combining the membrane containing 5 wt.% MXene with MXene/PEDOT:PSS electrodes exhibited an areal capacitance of 22.29 ± 1.22 mF·cm −2 , approximately 2.48 times that of the corresponding actuator with PEDOT:PSS electrodes. This configuration exhibited the peak‐to‐peak bending strain of 0.8130% at 1 V and 0.1 Hz, an approximately 4.04‐fold increase over the MXene‐free reference actuator, while generating a specific maximum blocking force of 18.63 mN·mm −1 at 1.5 V and 0.1 Hz. These results demonstrate that coordinated MXene incorporation in the membrane and electrodes enables systematic tuning of electrochemical response, deformation, and force generation in the actuators.
Förderung
- National Research Foundation of Korea
Zitieren
APA
Kim, G., & Kim, J. (2026). Membrane‐Electrode Co‐Engineering for Highly Responsive and Strong Ionic Polymer‐MXene Composite Actuators. Macromolecular Materials and Engineering, 311(11). https://doi.org/10.1002/mame.70387
Vancouver
Kim G, Kim J. Membrane‐Electrode Co‐Engineering for Highly Responsive and Strong Ionic Polymer‐MXene Composite Actuators. Macromolecular Materials and Engineering. 2026;311(11). doi:10.1002/mame.70387
BibTeX
@article{Kim2026,
author = {Kim, Gwonmin and Kim, Jaehwan},
title = {Membrane‐Electrode Co‐Engineering for Highly Responsive and Strong Ionic Polymer‐MXene Composite Actuators},
journal = {Macromolecular Materials and Engineering},
year = {2026},
volume = {311},
number = {11},
doi = {10.1002/mame.70387}
}
EUVIMED