Long‐Term Marine‐Induced Aging Mechanisms in FDM‐Printed PC, ABS and HIPS: Molecular and Microstructural Evolution
Macromolecular Materials and Engineering · 2026-07 · 311 (7)
DOI: 10.1002/mame.70299 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 25.07.2026. Verfasst von Esperanza Díaz und 4 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Eusko Jaurlaritza.
Abstract (Originalsprache)
Additive manufacturing by fused deposition modelling (FDM) has expanded the use of engineering thermoplastics in environments where long‐term durability remains insufficiently characterized. In this work, the molecular and microstructural aging mechanisms of FDM‐printed polycarbonate (PC), acrylonitrile–butadiene–styrene (ABS) and high‐impact polystyrene (HIPS) were investigated after 12 months of natural estuarine exposure, covering one seasonal cycles. Despite negligible bulk mass loss (≤0.16%), pronounced molecular degradation occurred. Gel permeation chromatography revealed a clear susceptibility hierarchy (PC > ABS > HIPS), with PC exhibiting a 58% reduction in number‐average molecular weight and a substantial increase in dispersity, indicative of dominant chain scission. ATR–FTIR and SEM analyses suggested surface‐confined oxidative and hydrolytic modification accompanied by progressive attenuation of interlayer definition. Differential scanning calorimetry showed stable bulk thermal transitions, indicating that degradation remained spatially localized. Mechanical testing revealed increased stiffness and reduced deformation capacity, consistent with molecular‐weight‐driven embrittlement. The combined results seem to indicate a diffusion‐limited, surface‐controlled degradation regime in which architecture‐dependent transport phenomena inherent to FDM structures condition degradation kinetics. These findings are consistent with the fact that molecular restructuring precedes macroscopic erosion and governs the mechanical lifetime of additively manufactured thermoplastics in humid environments.
Förderung
- Eusko Jaurlaritza
Zitieren
APA
Díaz, E., Merodio, Y., Puerto, I., Zubeldia‐Reina, J. M., & León, X. (2026). Long‐Term Marine‐Induced Aging Mechanisms in FDM‐Printed PC, ABS and HIPS: Molecular and Microstructural Evolution. Macromolecular Materials and Engineering, 311(7). https://doi.org/10.1002/mame.70299
Vancouver
Díaz E, Merodio Y, Puerto I, Zubeldia‐Reina JM, León X. Long‐Term Marine‐Induced Aging Mechanisms in FDM‐Printed PC, ABS and HIPS: Molecular and Microstructural Evolution. Macromolecular Materials and Engineering. 2026;311(7). doi:10.1002/mame.70299
BibTeX
@article{Daz2026,
author = {Díaz, Esperanza and Merodio, Yolanda and Puerto, Igor and Zubeldia‐Reina, José Manuel and León, Xabier},
title = {Long‐Term Marine‐Induced Aging Mechanisms in FDM‐Printed PC, ABS and HIPS: Molecular and Microstructural Evolution},
journal = {Macromolecular Materials and Engineering},
year = {2026},
volume = {311},
number = {7},
doi = {10.1002/mame.70299}
}
EUVIMED