Controlled Crosslinking of TPU: A Case Study
Macromolecular Materials and Engineering · 2026-07 · 311 (7)
DOI: 10.1002/mame.70293 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 21.07.2026. Verfasst von Rasoul Rahimzadeh und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A controlled soft segment (SS) crosslinking strategy was used to improve the high‐temperature mechanical performance of thermoplastic polyurethane (TPU) while preserving melt processability. Linear (TPU) and partially crosslinked TPUs (xTPUs) were synthesized by a two‐step prepolymer method using polycaprolactone triol (PCLT) as a multifunctional SS crosslinker, with triol hydroxyl contributions of 0, 2.5, 5, and 10 mol%. The formulations were designed to maintain nearly constant hard segment (HS) content, chemistry, and comparable HS spacing, enabling the isolated evaluation of crosslinking effects. Relative to the linear TPU, the xTPUs exhibited progressively improved high‐temperature thermomechanical stability, including up to 25% higher rubbery modulus, 30°C delayed onset of terminal flow, 55% lower creep deformation, 90% lower creep rate, and 14% improved elastic recovery at 125°C. FTIR, DSC, and SAXS analysis showed that the introduced crosslinker content was low enough to preserve thermoplastic character, while increasingly restricting annealing‐induced phase separation and hard domain development. Reprocessing experiments demonstrated that controlled crosslinking significantly improved retention of high‐temperature creep resistance after repeated melt processing, with xTPU‐10 showing the best durability. Overall, controlled SS crosslinking provides an effective route to balance enhanced high‐temperature performance, melt reprocessability, and improved sustainability in TPU systems.
Zitieren
APA
Rahimzadeh, R., Grondz, J., Shin, D. J., Souza, L., & Manas‐Zloczower, I. (2026). Controlled Crosslinking of TPU: A Case Study. Macromolecular Materials and Engineering, 311(7). https://doi.org/10.1002/mame.70293
Vancouver
Rahimzadeh R, Grondz J, Shin DJ, Souza L, Manas‐Zloczower I. Controlled Crosslinking of TPU: A Case Study. Macromolecular Materials and Engineering. 2026;311(7). doi:10.1002/mame.70293
BibTeX
@article{Rahimzadeh2026,
author = {Rahimzadeh, Rasoul and Grondz, Jake and Shin, Dong Joon and Souza, Lucio and Manas‐Zloczower, Ica},
title = {Controlled Crosslinking of TPU: A Case Study},
journal = {Macromolecular Materials and Engineering},
year = {2026},
volume = {311},
number = {7},
doi = {10.1002/mame.70293}
}
EUVIMED