EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rational Design of Maleic Anhydride Grafted Ethylene/1‐Octene Modifier Systems for Polyamide 6 Impact Modification

Abdul Kadir Deeb, Oliver Neuß, Silke Rathgeber

Macromolecular Materials and Engineering · 2026-07 · 311 (7)

DOI: 10.1002/mame.70278 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 28.07.2026. Verfasst von Abdul Kadir Deeb und 2 weiteren Autor:innen. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a rational design strategy for ternary polyamide 6 (PA6) compounds impact‐modified with ethylene/1‐octene copolymers (EOR), optimizing mechanical properties, processability, and sustainability. By combining ungrafted EOR with 16 mol% octene (EOR‐16) and maleic anhydride (MAH)‐grafted EOR with 13 mol% octene (EOR‐13), the formulation exploits the synergistic benefits of both. EOR‐16 enhances low‐temperature toughness through particle deformation and cavitation due to its high deformability, whereas EOR‐13 promotes matrix shear yielding at elevated temperatures owing to its high strength arising from grafting‐induced cross‐linking and residual crystallinity. Grafting is limited to EOR‐13 to avoid inherent degradation of EOR‐16. An effective MAH content c MAH of 0.5 wt.% yields a fine, unimodal rubber morphology and a brittle–ductile transition temperature (BDTT) of about −20°C without compromising toughness. Reducing c MAH to 0.3 wt.% shifts the BDTT to −15°C but retains morphology and high impact strength, offering processing and cost advantages. Lowering c MAH from 1.0 to 0.5 or 0.3 wt.% reduces viscosity by up to 24% and improves flow by up to 17%, enabling more efficient injection molding. Economically, partial substitution with EOR‐16 cuts raw material costs by up to 24% and compound prices by 5%–7%. Ecologically, the carbon footprint is reduced by up to 2.3%. Overall, this ternary approach offers a direct‐dosing, high‐performance, cost‐effective, and sustainable route to advanced PA6 formulations.

Zitieren

APA

Deeb, A. K., Neuß, O., & Rathgeber, S. (2026). Rational Design of Maleic Anhydride Grafted Ethylene/1‐Octene Modifier Systems for Polyamide 6 Impact Modification. Macromolecular Materials and Engineering, 311(7). https://doi.org/10.1002/mame.70278

Vancouver

Deeb AK, Neuß O, Rathgeber S. Rational Design of Maleic Anhydride Grafted Ethylene/1‐Octene Modifier Systems for Polyamide 6 Impact Modification. Macromolecular Materials and Engineering. 2026;311(7). doi:10.1002/mame.70278

BibTeX
@article{Deeb2026,
  author = {Deeb, Abdul Kadir and Neuß, Oliver and Rathgeber, Silke},
  title = {Rational Design of Maleic Anhydride Grafted Ethylene/1‐Octene Modifier Systems for Polyamide 6 Impact Modification},
  journal = {Macromolecular Materials and Engineering},
  year = {2026},
  volume = {311},
  number = {7},
  doi = {10.1002/mame.70278}
}
Kostenlos starten →