Leveraging Itaconic Acid in Microcrystalline Cellulose Reinforced Shape Memory Photopolymers for Sustainable 4D Printing
Macromolecular Materials and Engineering · 2026-01 · 311 (1)
DOI: 10.1002/mame.202500227 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 22.09.2025. Verfasst von James A. Dicks und 1 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 132 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University Research Committee, Emory University.
Abstract (Originalsprache)
Developing sustainable 3D printable materials that confer competitive mechanical properties as well as advanced properties such as shape memory has remained a challenge. To address these issues, this work investigated the incorporation of economically accessible microcrystalline cellulose reinforcing particles with itaconate surface grafting within itaconated castor oil monomer and isobornyl (meth)acrylate (IBO(M)A) reactive diluent formulations. Using itaconate surface grafted microcrystalline cellulose particles tolerated high reinforcement loading up to 10 wt.%, and yielded improved mechanical properties compared to unmodified particles. Varying the reinforcing particle loading achieved tailorable mechanical properties, while the choice of reactive diluent also led to differing mechanical properties (IBOA: E of 0.86–1.59 GPa, UTS of 14.8–24.7 MPa and IBOMA: E of 1.01–1.39 GPa, UTS of 21–27.7 MPa). Formulations up to 5 wt.% particle loading were 3D printed using masked stereolithography, achieving detailed features and intricate structures with low polymerization shrinkage. The 3D printed polymers displayed efficient shape memory behavior with thermal actuation at 100°C. This work highlights the efficacy of microcrystalline cellulose and its ease of surface modification, the potential to use itaconic acid as a sustainable source of reactive unsaturation in vat photopolymerization additive manufacturing, and that 3D printed materials with a high biobased carbon content that were also mechanically competitive and displayed shape memory capabilities could be readily achieved through facile synthetic pathways.
Förderung
- University Research Committee, Emory University
Zitieren
APA
Dicks, J. A., & Woolard, C. (2026). Leveraging Itaconic Acid in Microcrystalline Cellulose Reinforced Shape Memory Photopolymers for Sustainable 4D Printing. Macromolecular Materials and Engineering, 311(1). https://doi.org/10.1002/mame.202500227
Vancouver
Dicks JA, Woolard C. Leveraging Itaconic Acid in Microcrystalline Cellulose Reinforced Shape Memory Photopolymers for Sustainable 4D Printing. Macromolecular Materials and Engineering. 2026;311(1). doi:10.1002/mame.202500227
BibTeX
@article{Dicks2026,
author = {Dicks, James A. and Woolard, Chris},
title = {Leveraging Itaconic Acid in Microcrystalline Cellulose Reinforced Shape Memory Photopolymers for Sustainable 4D Printing},
journal = {Macromolecular Materials and Engineering},
year = {2026},
volume = {311},
number = {1},
doi = {10.1002/mame.202500227}
}
EUVIMED