EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sound‐Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction

Reza Navidpour, Taher Azdast, Rezgar Hasanzadeh, Milad Moradian, Peyman Mihankhah, Asghar Rasouli

Macromolecular Materials and Engineering · 2025-07 · 310 (7)

DOI: 10.1002/mame.202400450 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 08.03.2025. Verfasst von Reza Navidpour und 5 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The emergence of 3D printing technology has enabled the fabrication of absorbers with functionally graded (FG) porous structure and controlled porosity that can absorb sound waves across a broader frequency range. In this study, sound absorption properties of fused filament fabrication (FFF) 3D printed parts with FG porous structure and controlled pore sizes are investigated. For this purpose, samples with single porosity with infill densities of 40% to 90% are first printed to compare with the absorption coefficient of FG porous samples. FG porous samples are also printed as unified structures in two groups of FG porosity 40/50/60% and 70/80/90%. Sound absorption coefficient is tested using the transfer function method and impedance tube sound absorption test system. The experimental results of single porosity samples show that at higher frequencies, samples with lower infill density (higher porosity) have higher sound absorption coefficients, while at lower frequencies, samples with higher infill density (lower porosity) have more effective sound absorption. Unlike uniform porous structures at lower frequencies, FG porous structure provides higher sound absorption without increasing thickness and weight. In addition, it is found that the orientation of samples with the FG porous structure has a different behavior of the sound absorption coefficient.

Zitieren

APA

Navidpour, R., Azdast, T., Hasanzadeh, R., Moradian, M., Mihankhah, P., & Rasouli, A. (2025). Sound‐Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction. Macromolecular Materials and Engineering, 310(7). https://doi.org/10.1002/mame.202400450

Vancouver

Navidpour R, Azdast T, Hasanzadeh R, Moradian M, Mihankhah P, Rasouli A. Sound‐Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction. Macromolecular Materials and Engineering. 2025;310(7). doi:10.1002/mame.202400450

BibTeX
@article{Navidpour2025,
  author = {Navidpour, Reza and Azdast, Taher and Hasanzadeh, Rezgar and Moradian, Milad and Mihankhah, Peyman and Rasouli, Asghar},
  title = {Sound‐Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction},
  journal = {Macromolecular Materials and Engineering},
  year = {2025},
  volume = {310},
  number = {7},
  doi = {10.1002/mame.202400450}
}
Kostenlos starten →