Light Based 3D Printable Photochromic WO 3 Polymer Gel Nanocomposites for Heat Management and Decorative Applications
Macromolecular Materials and Engineering · 2025-07 · 310 (7)
DOI: 10.1002/mame.202400449 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 04.04.2025. Verfasst von Alister Urain und 7 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerio de Ciencia e Innovación, Hezkuntza, Hizkuntza Politika Eta Kultura Saila, Eusko Jaurlaritza.
Abstract (Originalsprache)
Materials with functionalities such as photochromicity are needed to extend the palette of materials for additive manufacturing. Herein, gel nanocomposites (gel NCs) with photochromic properties are designed for light‐induced 3D printing. The photochromic resin is prepared by using a photocurable acrylic formulation, containing tungsten oxide nanoparticles (WO 3 NPs) in the presence of aqueous and alcohol plasticizers. After photopolymerization, gel NCs transition reversibly from a highly transparent colorless state to a dark blue‐colored state when exposed to UV light. The addition of ethylene glycol to water as a co‐plasticizer and a lithium salt improves the gels coloration kinetics while providing anti‐freezing and anti‐drying capabilities. The gels demonstrate high luminous transmission (T lum ) of 89.24% and optical modulations (ΔT sol ) of up to 75.96%, with a coloration speed of less than 1 min. Energy‐saving simulations show that the WO 3 gel NCs can be used for heat management applications. The preparation of costume‐made 3D designs using the photocurable resin with a digital light processing (DLP) 3D printer, demonstrates that the resin can be used for the additive manufacturing of photochromic gels.
Förderung
- Ministerio de Ciencia e Innovación
- Hezkuntza, Hizkuntza Politika Eta Kultura Saila, Eusko Jaurlaritza
Zitieren
APA
Urain, A., Aziz, I. A., Lopez‐Larrea, N., Calvo, I., Conde, A. M., Criado‐Gonzalez, M., Casado, N., & Mecerreyes, D. (2025). Light Based 3D Printable Photochromic WO 3 Polymer Gel Nanocomposites for Heat Management and Decorative Applications. Macromolecular Materials and Engineering, 310(7). https://doi.org/10.1002/mame.202400449
Vancouver
Urain A, Aziz IA, Lopez‐Larrea N, Calvo I, Conde AM, Criado‐Gonzalez M, et al. Light Based 3D Printable Photochromic WO 3 Polymer Gel Nanocomposites for Heat Management and Decorative Applications. Macromolecular Materials and Engineering. 2025;310(7). doi:10.1002/mame.202400449
BibTeX
@article{Urain2025,
author = {Urain, Alister and Aziz, Ilaria Abdel and Lopez‐Larrea, Naroa and Calvo, Iñigo and Conde, Ana M. and Criado‐Gonzalez, Miryam and Casado, Nerea and Mecerreyes, David},
title = {Light Based 3D Printable Photochromic WO 3 Polymer Gel Nanocomposites for Heat Management and Decorative Applications},
journal = {Macromolecular Materials and Engineering},
year = {2025},
volume = {310},
number = {7},
doi = {10.1002/mame.202400449}
}
EUVIMED