Lignin/Poly(vinylpyrrolidone) Multifilament Fibers Dry‐Spun from Water as Carbon Fiber Precursors
Macromolecular Materials and Engineering · 2024-03 · 309 (3)
DOI: 10.1002/mame.202300296 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Materials and Engineering, online erschienen am 17.10.2023. Verfasst von Philipp Kreis und 8 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The preparation of lignin‐based carbon fibers by dry spinning from aqueous solution followed by stabilization and continuous carbonization to endless yarns is reported. The influence of carbonization temperature and draw ratio on the morphology and mechanical properties of the final carbon fibers is investigated by single‐fiber testing, wide‐angle X‐ray scattering, scanning electron microscopy, and Raman spectroscopy. A draw ratio of 5% (1.05) with a carbonization temperature of 1400 °C leads to the best mechanical properties. The resulting multifilament carbon fibers have an average diameter between 10–12 µm, an average tensile strength of 1.30 ± 0.32 GPa, a Young's modulus of 101 ± 18 GPa, and an elongation at break of 1.31 ± 0.23%. The maximum Weibull strength ( 𝜎 0 ) is 1.04 GPa with a Weibull modulus ( m ) of 5.1. The use of a water‐soluble system is economically advantageous; also, unlike melt‐spun lignin fibers, the dry‐spun precursor fibers can be thermally converted without any additional crosslinking step.
Zitieren
APA
Kreis, P., Frank, E., Clauß, B., Bauch, V., Stolpmann, H., Kuske, L., Schneck, T., König, S., & Buchmeiser, M. R. (2024). Lignin/Poly(vinylpyrrolidone) Multifilament Fibers Dry‐Spun from Water as Carbon Fiber Precursors. Macromolecular Materials and Engineering, 309(3). https://doi.org/10.1002/mame.202300296
Vancouver
Kreis P, Frank E, Clauß B, Bauch V, Stolpmann H, Kuske L, et al. Lignin/Poly(vinylpyrrolidone) Multifilament Fibers Dry‐Spun from Water as Carbon Fiber Precursors. Macromolecular Materials and Engineering. 2024;309(3). doi:10.1002/mame.202300296
BibTeX
@article{Kreis2024,
author = {Kreis, Philipp and Frank, Erik and Clauß, Bernd and Bauch, Volker and Stolpmann, Heiko and Kuske, Lisa and Schneck, Tanja and König, Simon and Buchmeiser, Michael R.},
title = {Lignin/Poly(vinylpyrrolidone) Multifilament Fibers Dry‐Spun from Water as Carbon Fiber Precursors},
journal = {Macromolecular Materials and Engineering},
year = {2024},
volume = {309},
number = {3},
doi = {10.1002/mame.202300296}
}
EUVIMED