EUVIMEDEUVIMED entdecken
Crossref

Tailored AlCoCrNiMo 0.3 High Entropy Alloy Coatings for Advanced Corrosion Protection

Chidambaram Ramesh Kannan, Velmurugan Santhosh, Mattathil Hassan Faisal, Seenivasan Soundararajan, Annamalai Kumar, Amaladas Daniel Das, Manivannan Subramanian, Lakshmi Devaraj, Asokan Vallimanalan

Materials and Corrosion · 2026-02 · 77 (2) · 290-298

DOI: 10.1002/maco.70055 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials and Corrosion, online erschienen am 01.10.2025. Verfasst von Chidambaram Ramesh Kannan und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study reports the synthesis and corrosion performance of a non‐equiatomic AlCoCrNiMo 0.3 high‐entropy alloy (HEA) coating, developed via mechanical alloying and deposited onto SS316 substrates using high‐velocity oxy‐fuel (HVOF) spraying. X‐ray diffraction confirmed the formation of a single‐phase body‐centered cubic (BCC) solid solution after 20 h of milling, while FESEM‐EDS analysis revealed a dense and homogeneously distributed microstructure. Electrochemical characterization in 3.5 wt% NaCl solution demonstrated that the AlCoCrNiMo 0.3 coating exhibited superior corrosion resistance, with a lower corrosion current density ( i corr = 0.45 µA/cm 2 ) and a more noble corrosion potential E corr = −320 mV versus SCE compared to equiatomic AlCoCrNiMo and WC–CoCr coatings. Post‐corrosion analysis confirmed the formation of a Cr/Mo‐rich passive layer responsible for localized corrosion inhibition. The optimized Mo addition avoided the formation of brittle secondary phases, maintaining structural integrity. These results establish AlCoCrNiMo 0.3 as a promising candidate for corrosion‐resistant coatings in chloride‐rich environments.

Zitieren

APA

Kannan, C. R., Santhosh, V., Faisal, M. H., Soundararajan, S., Kumar, A., Das, A. D., Subramanian, M., Devaraj, L., & Vallimanalan, A. (2026). Tailored AlCoCrNiMo 0.3 High Entropy Alloy Coatings for Advanced Corrosion Protection. Materials and Corrosion, 77(2), 290-298. https://doi.org/10.1002/maco.70055

Vancouver

Kannan CR, Santhosh V, Faisal MH, Soundararajan S, Kumar A, Das AD, et al. Tailored AlCoCrNiMo 0.3 High Entropy Alloy Coatings for Advanced Corrosion Protection. Materials and Corrosion. 2026;77(2):290-298. doi:10.1002/maco.70055

BibTeX
@article{Kannan2026,
  author = {Kannan, Chidambaram Ramesh and Santhosh, Velmurugan and Faisal, Mattathil Hassan and Soundararajan, Seenivasan and Kumar, Annamalai and Das, Amaladas Daniel and Subramanian, Manivannan and Devaraj, Lakshmi and Vallimanalan, Asokan},
  title = {Tailored AlCoCrNiMo 0.3 High Entropy Alloy Coatings for Advanced Corrosion Protection},
  journal = {Materials and Corrosion},
  year = {2026},
  volume = {77},
  number = {2},
  pages = {290--298},
  doi = {10.1002/maco.70055}
}
Kostenlos starten →