EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Multi‐Crosslinkable Methacrylated Alginate‐GelMa Bioink for Drop‐on‐Demand Bioprinting

Tommi Bui iD, Emine Karakaya, Jessica Faber iD, Jonas Röder iD, Jörg Teßmar iD, Julian Bauer iD, Oliver Friedrich iD, Silvia Budday iD, Aldo R Boccaccini iD, Rainer Detsch iD

Macromolecular Bioscience · 2026-11 · 26 (11)

DOI: 10.1002/mabi.70278 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Bioscience, online erschienen am 31.10.2026. Verfasst von Tommi Bui und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Biomaterials, Department of Materials Science and Engineering, Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen, Germany. Hauptthemen laut MEDLINE: Alginates, Bioprinting, Gelatin, Methacrylates. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation (DFG; Collaborative Research Center SFB/TRR225 'From the fundamentals of Biofabrication to functional tissue models').

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To advance biofabrication, this work presents the development of a multi‐crosslinkable bioink based on methacrylated alginate di‐aldehyde (ADAMa) combined with gelatine methacryloyl (GelMa). ADAMa was synthesized using methacrylic anhydride under specific conditions, and successful functionalization as well as changes in chain length were confirmed by NMR (Nuclear Magnetic Resonance), ATR‐FTIR (Attenuated Total Reflectance—Fourier Transform Infrared Spectroscopy), and GPC (Gel Permeation Chromatography) analyses. The resulting ADAMa–GelMa bioink can be crosslinked via several independent mechanisms, including UV‐initiated photopolymerization, enzymatic crosslinking, Schiff‐base formation, and ionic gelation with calcium ions. Our study confirms an increase in the compressive modulus with increasing GelMa content, ranging from 0.3 to 30 kPa, and in vitro biocompatibility for ADAMa–GelMa bioink with enhanced cell–material interaction for a 25:75 ADAMa–GelMa ratio. Furthermore, Drop‐on‐Demand (DoD) bioprinting performance was evaluated using filament fusion test and grid structure test analyses, along with structural fidelity assessment of free‐standing pillar arrays, including metrics such as pillar height and spacing. Multiphoton microscopy further revealed homogeneous cell distribution within printed pillars. Overall, this system provides tuneable mechanical properties, high cell viability, and strong structural fidelity, making it a promising candidate for the fabrication of complex, cell‐laden constructs in advanced biofabrication applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlginatesBioprintingGelatinMethacrylatesCross-Linking ReagentsAnimalsSpectroscopy, Fourier Transform InfraredMiceHumansBiocompatible Materials

Stichwörter der Autor:innen

biochipbiocompatibilitybiofabricationcompressive strengthfourier transform infrared spectroscopygel permeation chromatographymaterials sciencenanotechnologyphotopolymersurface modification

Substanzen

AlginatesGelatinMethacrylatesCross-Linking ReagentsBiocompatible Materials

Autor:innen und Institutionen

  • Institute of Biomaterials, Department of Materials Science and Engineering, Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen, Germany.
  • Institute of Continuum Mechanics and Biomechanics, Department of Mechanical Engineering, Friedrich-Alexander-University Erlangen-Nürnberg, Fürth, Germany.
  • Department For Functional Materials in Medicine and Dentistry, University of Würzburg, Germany.
  • Institute of Medical Biotechnology, Department of Chemical and Biological Engineering, Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen, Germany.

ORCID-Profile: Tommi Bui, Jessica Faber, Jonas Röder, Jörg Teßmar, Julian Bauer, Oliver Friedrich, Silvia Budday, Aldo R Boccaccini, Rainer Detsch

Förderung

  • German Research Foundation (DFG; Collaborative Research Center SFB/TRR225 'From the fundamentals of Biofabrication to functional tissue models')

Zitieren

APA

Bui, T., Karakaya, E., Faber, J., Röder, J., Teßmar, J., Bauer, J., Friedrich, O., Budday, S., Boccaccini, A. R., & Detsch, R. (2026). A Multi‐Crosslinkable Methacrylated Alginate‐GelMa Bioink for Drop‐on‐Demand Bioprinting. Macromolecular Bioscience, 26(11). https://doi.org/10.1002/mabi.70278

Vancouver

Bui T, Karakaya E, Faber J, Röder J, Teßmar J, Bauer J, et al. A Multi‐Crosslinkable Methacrylated Alginate‐GelMa Bioink for Drop‐on‐Demand Bioprinting. Macromolecular Bioscience. 2026;26(11). doi:10.1002/mabi.70278

BibTeX
@article{Bui2026,
  author = {Bui, Tommi and Karakaya, Emine and Faber, Jessica and Röder, Jonas and Teßmar, Jörg and Bauer, Julian and Friedrich, Oliver and Budday, Silvia and Boccaccini, Aldo R and Detsch, Rainer},
  title = {A Multi‐Crosslinkable Methacrylated Alginate‐GelMa Bioink for Drop‐on‐Demand Bioprinting},
  journal = {Macromolecular Bioscience},
  year = {2026},
  volume = {26},
  number = {11},
  doi = {10.1002/mabi.70278}
}
Kostenlos starten →