EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY 4.0

Comparative Effects of ZnO, MgO, and CaO Nanoparticles in 3D‐Printed Chitosan–Agarose Scaffolds on Antibacterial and Osteogenic Outcomes

Amir Hashemi iD, Masoumeh Ezati, Rima Paul, Inna Zumberg, Jaromir Bacovsky, Zdenka Fohlerova, Valentyna Provaznik

Macromolecular Bioscience · 2025

DOI: 10.1002/mabi.202500232 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Macromolecular Bioscience, 2025. Verfasst von Amir Hashemi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Faculty of Electrical Engineering and Communication Technologies, Brno University of Technology, Brno, Czech Re…. Hauptthemen laut MEDLINE: Chitosan, Anti-Bacterial Agents, Osteogenesis, Zinc Oxide. Die Arbeit nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the field of orthopedic surgery, large bone defects resulting from trauma, surgical resection, or congenital anomalies present significant challenges. In many cases, treatment necessitates scaffold structures that not only support bone regeneration but also address potential bacterial infections that can impede healing. In this study, we developed 3D bioprinted scaffolds using hydrogel‐based biomaterial ink comprising a blend of chitosan (CS) and agarose (AG), each separately fortified with ZnO, MgO, and CaO nanoparticles (NPs). We performed a comprehensive assessment of the inks' printability and wettability, and ascertained their rheological properties. The in vitro degradation of 3D bioprinted scaffolds was analyzed, their antibacterial capabilities against Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ) were explored, and the differentiation of bone marrow mesenchymal stem cells (BMSCs) was evaluated. The findings indicated that the hydrogel, CS‐AG (CA), composed of 3.5% (w/v) CS and 1.5% (w/v) AG, demonstrated superior printing characteristics. Among the nanoparticles, ZnO proved to be a notable booster of antibacterial activity and facilitated osteogenic differentiation and proliferation of bone marrow stem cells. Conversely, MgO showed similar antibacterial efficacy but was less successful in promoting cell proliferation compared to ZnO and CaO, whereas CaO displayed the weakest antibacterial efficacy. The results identify the ZnO NP‐loaded CA biomaterial ink as a viable option for addressing bone abnormalities, enhancing bone repair, and preventing bacterial infection.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ChitosanAnti-Bacterial AgentsOsteogenesisZinc OxideMagnesium OxideTissue ScaffoldsPrinting, Three-DimensionalCalcium CompoundsNanoparticlesSepharoseOxidesStaphylococcus aureusEscherichia coliMesenchymal Stem CellsAnimalsCell DifferentiationCell Proliferation

Stichwörter der Autor:innen

Chitosan‐agarose biomaterial inkZnO/MgO/CaO nanoparticlesantibacterial propertiesbioprinted scaffoldsbone marrow stem cellsextrusion 3D bioprintingosteogenic differentiation

Substanzen

ChitosanAnti-Bacterial AgentsZinc OxideMagnesium OxideCalcium CompoundslimeSepharoseOxides

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Faculty of Electrical Engineering and Communication Technologies, Brno University of Technology, Brno, Czech Republic.
  • Delong Instruments a.s., Brno, Czech Republic.
  • Department of Microelectronics, Faculty of Electrical Engineering and Communication, Brno University of Technology, Brno, Czech Republic.

ORCID-Profile: Amir Hashemi

Zitieren

APA

Hashemi, A., Ezati, M., Paul, R., Zumberg, I., Bacovsky, J., Fohlerova, Z., & Provaznik, V. (2025). Comparative Effects of ZnO, MgO, and CaO Nanoparticles in 3D‐Printed Chitosan–Agarose Scaffolds on Antibacterial and Osteogenic Outcomes. Macromolecular Bioscience. https://doi.org/10.1002/mabi.202500232

Vancouver

Hashemi A, Ezati M, Paul R, Zumberg I, Bacovsky J, Fohlerova Z, et al. Comparative Effects of ZnO, MgO, and CaO Nanoparticles in 3D‐Printed Chitosan–Agarose Scaffolds on Antibacterial and Osteogenic Outcomes. Macromolecular Bioscience. 2025. doi:10.1002/mabi.202500232

BibTeX
@article{Hashemi2025,
  author = {Hashemi, Amir and Ezati, Masoumeh and Paul, Rima and Zumberg, Inna and Bacovsky, Jaromir and Fohlerova, Zdenka and Provaznik, Valentyna},
  title = {Comparative Effects of ZnO, MgO, and CaO Nanoparticles in 3D‐Printed Chitosan–Agarose Scaffolds on Antibacterial and Osteogenic Outcomes},
  journal = {Macromolecular Bioscience},
  year = {2025},
  doi = {10.1002/mabi.202500232}
}
Kostenlos starten →