Mechanochemical Tailoring of Lignin Structure: Influence of Different Particle Sizes in the Organosolv Process
Macromolecular Bioscience · 2024
DOI: 10.1002/mabi.202400090 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromolecular Bioscience, 2024. Verfasst von Jonas Bergrath und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Natural Sciences, Bonn-Rhein-Sieg University of Applied Sciences, von-Liebig-Strasse 20, 53359, Rheinbach, Germany. Hauptthemen laut MEDLINE: Lignin, Particle Size. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Graduate Institute of the Bonn-Rhein-Sieg University of Applied Sciences, TREE Institute of the Bonn-Rhein-Sieg University of Applied Sciences.
Abstract (Originalsprache)
The autocatalyzed ethanolic organosolv process is gaining increasing attention for the sulfur‐free isolation of lignin, which is subsequently used as a renewable substitute for various fossil‐based applications. For the first time, the mechanochemical influence of seven different particle sizes of two different biomasses on the respective organosolv lignin structure is examined. Wine pruning (Pinot Noir) and wine pomace (Accent) are used for organosolv process with particle sizes ranging from 2.0–1.6 mm to less than 0.25 mm. As particle size decreases, the weight‐average molecular weight increases, while the total phenol content decreases significantly. Additionally, the distribution of the lignin‐typical monolignols and relevant substructures, as determined by two‐dimensional heteronuclear nuclear magnetic resonance spectra single quantum coherence (HSQC), is observed. The degree of grinding of the biomass has a clear chemical–structural influence on the isolated HG and HGS organosolv lignins. Therefore, it is crucial to understand this influence to apply organosolv lignins in a targeted manner. In the future, particle size specifications in the context of the organosolv process should be expressed in terms of distribution densities rather than in terms of a smaller than specification.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Natural Sciences, Bonn-Rhein-Sieg University of Applied Sciences, von-Liebig-Strasse 20, 53359, Rheinbach, Germany.
- Department of Chemistry and Biology, University of Wuppertal, 42119, Wuppertal, Germany.
- Kompetenzzentrum Holz GmbH - Competence Center for Wood Chemistry and Wood Composites (Wood K Plus), Altenberger Strasse 69, Linz, 4040, Austria.
- Faculty of Agriculture, University of Bonn, Meckenheimer Allee 174, 53115, Bonn, Germany.
- Faculty of Environment and Natural Sciences, Brandenburg University of Technology Cottbus-Senftenberg, 03046, Cottbus, Germany.
ORCID-Profile: Jonas Bergrath, Franz Zeppetzauer, Jessica Rumpf, Birgit Kamm, Robert Putz, Margit Schulze
Förderung
- Graduate Institute of the Bonn-Rhein-Sieg University of Applied Sciences
- TREE Institute of the Bonn-Rhein-Sieg University of Applied Sciences
Zitieren
APA
Bergrath, J., Zeppetzauer, F., Rumpf, J., Kamm, B., Putz, R., Kling, H. W., & Schulze, M. (2024). Mechanochemical Tailoring of Lignin Structure: Influence of Different Particle Sizes in the Organosolv Process. Macromolecular Bioscience. https://doi.org/10.1002/mabi.202400090
Vancouver
Bergrath J, Zeppetzauer F, Rumpf J, Kamm B, Putz R, Kling HW, et al. Mechanochemical Tailoring of Lignin Structure: Influence of Different Particle Sizes in the Organosolv Process. Macromolecular Bioscience. 2024. doi:10.1002/mabi.202400090
BibTeX
@article{Bergrath2024,
author = {Bergrath, Jonas and Zeppetzauer, Franz and Rumpf, Jessica and Kamm, Birgit and Putz, Robert and Kling, Hans-Willi and Schulze, Margit},
title = {Mechanochemical Tailoring of Lignin Structure: Influence of Different Particle Sizes in the Organosolv Process},
journal = {Macromolecular Bioscience},
year = {2024},
doi = {10.1002/mabi.202400090}
}
EUVIMED