EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Intrinsically Design‐Rule‐Compliant Nanophotonic Inverse Design via Learned Generative Manifolds

Bahrem Serhat Danis, Demet Baldan Desdemir, Enes Akcakoca, Zeynep Ipek Yanmaz, Gulzade Polat, Ahmet Onur Dasdemir, Aytug Aydogan, Abdullah Magden, Emir Salih Magden

Laser & Photonics Reviews · 2026-11 · 20 (21)

DOI: 10.1002/lpor.71486 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Laser & Photonics Reviews, online erschienen am 08.07.2026. Verfasst von Bahrem Serhat Danis und 8 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Türkiye Bilimsel ve Teknolojik Araştirma Kurumu.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inverse design has enabled the systematic design of ultra‐compact and high‐performance nanophotonic components. Yet enforcing design‐rule compliance throughout the entire optimization trajectory, without platform‐specific regularization scheduling, remains an open problem. Without explicit fabrication constraints, optimized geometries can violate minimum feature size constraints, producing structures incompatible with lithography processes. Established projection‐filter and morphological constraint methods enforce compliance within topology optimization, but rely on scheduled regularization with process‐dependent design rules. This motivates parameterization approaches that encode fabrication constraints as intrinsic properties of the design space. Here, we demonstrate intrinsically design‐rule‐compliant silicon photonic inverse design through a deep generative reparameterization that confines optimization to a learned manifold of fabrication‐compatible geometries, reducing computational cost by fivefold over unconstrained pixel‐based methods. We validate this approach across representative silicon photonic devices including broadband power splitters, spectral duplexers, and mode converters operating across the 1,500–1,600 nm band, for both electron‐beam lithography and photolithography platforms. Across all devices, the manifold‐based formulation achieves competitive performance metrics, while ensuring design‐rule compliance throughout the entire optimization trajectory. By treating fabrication constraints as a fundamental property of the design representation rather than an external penalty, this work establishes a direct pathway toward automated, platform‐agnostic, design‐rule‐compliant nanophotonic design pipelines.

Förderung

  • Türkiye Bilimsel ve Teknolojik Araştirma Kurumu

Zitieren

APA

Danis, B. S., Desdemir, D. B., Akcakoca, E., Yanmaz, Z. I., Polat, G., Dasdemir, A. O., Aydogan, A., Magden, A., & Magden, E. S. (2026). Intrinsically Design‐Rule‐Compliant Nanophotonic Inverse Design via Learned Generative Manifolds. Laser & Photonics Reviews, 20(21). https://doi.org/10.1002/lpor.71486

Vancouver

Danis BS, Desdemir DB, Akcakoca E, Yanmaz ZI, Polat G, Dasdemir AO, et al. Intrinsically Design‐Rule‐Compliant Nanophotonic Inverse Design via Learned Generative Manifolds. Laser & Photonics Reviews. 2026;20(21). doi:10.1002/lpor.71486

BibTeX
@article{Danis2026,
  author = {Danis, Bahrem Serhat and Desdemir, Demet Baldan and Akcakoca, Enes and Yanmaz, Zeynep Ipek and Polat, Gulzade and Dasdemir, Ahmet Onur and Aydogan, Aytug and Magden, Abdullah and Magden, Emir Salih},
  title = {Intrinsically Design‐Rule‐Compliant Nanophotonic Inverse Design via Learned Generative Manifolds},
  journal = {Laser & Photonics Reviews},
  year = {2026},
  volume = {20},
  number = {21},
  doi = {10.1002/lpor.71486}
}
Kostenlos starten →