EUVIMEDEUVIMED entdecken
Crossref

Catalytic Effect of Dibenzo‐18‐Crown‐6 Ether Complexes With Group 2 Metal Chlorides on the Kinetics of Ethylbenzene Oxidation

Ildar N. Zalyaliev, Nikolai V. Ulitin, Yana L. Lyulinskaya, Konstantin A. Tereshchenko, Natalia M. Nurullina, Svetlana N. Tuntseva, Tatyana L. Puchkova, Kharlampii E. Kharlampidi

International Journal of Chemical Kinetics · 2026-08 · 58 (8) · 564-576

DOI: 10.1002/kin.70066 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Chemical Kinetics, online erschienen am 21.04.2026. Verfasst von Ildar N. Zalyaliev und 7 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A kinetic model of ethylbenzene oxidation catalyzed by dibenzo‐18‐crown‐6 ether complexes with group 2 metal chlorides (Ca, Sr, Ba) was developed and parameterized using experimental data. Kinetic modeling demonstrated that: 1) an increase in the initial catalyst concentration from 1 to 100 mmol/L leads to a monotonic increase in the rate of ethylbenzene hydroperoxide formation (428 K, 1 atm, volume flow rate of air supply to the reactor of 0.018 m 3 /h, initial ethylbenzene concentration of 8.17 mol/L, initial concentrations of other species are 0), indicating that the formation of ethylbenzene hydroperoxide prevails over its decomposition; 2) catalysts deactivate within 1 h of the ethylbenzene oxidation process; thus, they are not affect subsequent transformations of ethylbenzene hydroperoxide during propylene epoxidation via the Halcon process; 3) among the dibenzo‐18‐crown‐6 ether complexes with group 2 metal chlorides, the complex with Ca chloride at an initial concentration of 5 mmol/L should be recognized as the best catalyst for industrial use (428 K, 1 atm, volume flow rate of air supply to the reactor of 0.018 m 3 /h, initial ethylbenzene concentration of 8.17 mol/L, initial concentrations of other species are 0), because it provides the same selectivity as that achieved in non‐catalytic ethylbenzene oxidation (about 80%) and reduces the time to reach 10% ethylbenzene conversion by a factor of three (from 1.5 h in the non‐catalytic process to 0.5 h in the catalytic process).

Zitieren

APA

Zalyaliev, I. N., Ulitin, N. V., Lyulinskaya, Y. L., Tereshchenko, K. A., Nurullina, N. M., Tuntseva, S. N., Puchkova, T. L., & Kharlampidi, K. E. (2026). Catalytic Effect of Dibenzo‐18‐Crown‐6 Ether Complexes With Group 2 Metal Chlorides on the Kinetics of Ethylbenzene Oxidation. International Journal of Chemical Kinetics, 58(8), 564-576. https://doi.org/10.1002/kin.70066

Vancouver

Zalyaliev IN, Ulitin NV, Lyulinskaya YL, Tereshchenko KA, Nurullina NM, Tuntseva SN, et al. Catalytic Effect of Dibenzo‐18‐Crown‐6 Ether Complexes With Group 2 Metal Chlorides on the Kinetics of Ethylbenzene Oxidation. International Journal of Chemical Kinetics. 2026;58(8):564-576. doi:10.1002/kin.70066

BibTeX
@article{Zalyaliev2026,
  author = {Zalyaliev, Ildar N. and Ulitin, Nikolai V. and Lyulinskaya, Yana L. and Tereshchenko, Konstantin A. and Nurullina, Natalia M. and Tuntseva, Svetlana N. and Puchkova, Tatyana L. and Kharlampidi, Kharlampii E.},
  title = {Catalytic Effect of Dibenzo‐18‐Crown‐6 Ether Complexes With Group 2 Metal Chlorides on the Kinetics of Ethylbenzene Oxidation},
  journal = {International Journal of Chemical Kinetics},
  year = {2026},
  volume = {58},
  number = {8},
  pages = {564--576},
  doi = {10.1002/kin.70066}
}
Kostenlos starten →