Advancing Sustainable Dispersive Liquid–Liquid Microextraction: Methodological Formats and Eco‐Friendly Solvents for Heavy Metal Analysis
Journal of Separation Science · 2026-06 · 49 (6)
DOI: 10.1002/jssc.70468 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Journal of Separation Science, online erschienen am 14.06.2026. Verfasst von Jameel Ahmed Baig und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, College of Science, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, Saudi Arabia. Die Arbeit nennt 112 Literaturangaben. Gefördert von: Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU).
Abstract (Originalsprache)
Heavy metals are among the most hazardous chemical pollutants, present in trace amounts in various samples. Prior to the quantitative measurement of heavy metals in a sample, an effective sample preparation technique is usually adopted. Among the various techniques, dispersive liquid–liquid microextraction (DLLME) is regarded as one of the most effective sample preparation strategies for heavy metal preconcentration due to its simplicity, speed, low cost, high extraction recovery, enrichment factor, and minimal solvent use. Various DLLME modes have been introduced, including ultrasound‐assisted DLLME, vortex‐assisted DLLME, air‐assisted DLLME, spray‐assisted DLLME, and effervescence‐assisted DLLME, to improve extraction efficiency. In addition, traditional organic solvents are being replaced with alternative solvent systems such as supramolecular solvents (SUPRAs), switchable solvents (SSs), and deep eutectic solvents (DESs) to improve the greenness of these DLLME approaches. Based on the benefits of various DLLME approaches and the use of these environmentally friendly solvents, this review briefly presents the extraction mechanisms and applications of various DLLME modes for heavy metal extraction. In addition, the use of the aforementioned alternative solvents in various DLLME approaches is discussed, along with their benefits. Moreover, the review presents a comparative assessment of different DLLME approaches and environmentally friendly solvents and critically examines limitations, including the use of chlorinated organic solvents in air‐assisted DLLME (AA‐DLLME), the use of organic solvents for analyte‐rich phase dilution, and the use of THF. Furthermore, a table summarizes the figures of merit for all DLLME methods reported (2021–2025) for heavy metal extraction.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry, College of Science, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh, Saudi Arabia.
- Department of Chemistry, Faculty of Sciences, Erciyes University, Kayseri, Turkiye.
- Department of Chemistry, Univesity of Karachi, Karachi, Pakistan.
- Centre of Excellence in Analytical Chemistry, University of Sindh, Jamshoro, Pakistan.
ORCID-Profile: Muhammad Balal Arain, Tasneem Gul Kazi, Mustafa Soylak
Förderung
- Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University (IMSIU)
Zitieren
APA
Baig, J. A., Arain, M. B., Kazi, T. G., & Soylak, M. (2026). Advancing Sustainable Dispersive Liquid–Liquid Microextraction: Methodological Formats and Eco‐Friendly Solvents for Heavy Metal Analysis. Journal of Separation Science, 49(6). https://doi.org/10.1002/jssc.70468
Vancouver
Baig JA, Arain MB, Kazi TG, Soylak M. Advancing Sustainable Dispersive Liquid–Liquid Microextraction: Methodological Formats and Eco‐Friendly Solvents for Heavy Metal Analysis. Journal of Separation Science. 2026;49(6). doi:10.1002/jssc.70468
BibTeX
@article{Baig2026,
author = {Baig, Jameel Ahmed and Arain, Muhammad Balal and Kazi, Tasneem Gul and Soylak, Mustafa},
title = {Advancing Sustainable Dispersive Liquid–Liquid Microextraction: Methodological Formats and Eco‐Friendly Solvents for Heavy Metal Analysis},
journal = {Journal of Separation Science},
year = {2026},
volume = {49},
number = {6},
doi = {10.1002/jssc.70468}
}
EUVIMED