Novel 3D printed lattice structure titanium cages evaluated in an ovine model of interbody fusion
JOR SPINE · 2023-09 · 6 (3)
DOI: 10.1002/jsp2.1268 ↗Kurz gefasst
Fachartikel in der Zeitschrift JOR SPINE, online erschienen am 10.06.2023. Verfasst von James W Johnson und 11 weiteren Autor:innen. Beteiligte Einrichtung: Orthopaedic Bioengineering Research Laboratory Colorado State University Fort Collins Colorado USA. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: NIH HHS.
Abstract (Originalsprache)
Background
The use of intervertebral cages within the interbody fusion setting is ubiquitous. Synthetic cages are predominantly manufactured using materials such as Ti and PEEK. With the advent of additive manufacturing techniques, it is now possible to spatially vary complex 3D geometric features within interbody devices, enabling the devices to match the stiffness of native tissue and better promote bony integration. To date, the impact of surface porosity of additively manufactured Ti interbody cages on fusion outcomes has not been investigated. Thus, the objective of this work was to determine the effect of implant endplate surface and implant body architecture of additive manufactured lattice structure titanium interbody cages on bony fusion.
Methods
Biomechanical, microcomputed tomography, static and dynamic histomorphometry, and histopathology analyses were performed on twelve functional spine units obtained from six sheep randomly allocated to body lattice or surface lattice groups.
Results
Nondestructive kinematic testing, microcomputed tomography analysis, and histomorphometry analyses of the functional spine units revealed positive fusion outcomes in both groups. These data revealed similar results in both groups, with the exception of bone‐in‐contact analysis, which revealed significantly improved bone‐in‐contact values in the body lattice group compared to the surface lattice group.
Conclusion
Both additively manufactured porous titanium cage designs resulted in increased fusion outcomes as compared to PEEK interbody cage designs as illustrated by the nondestructive kinematic motion testing, static and dynamic histomorphometry, microcomputed tomography, and histopathology analyses. While both cages provided for similar functional outcomes, these data suggest boney contact with an interbody cage may be impacted by the nature of implant porosity adjacent to the vertebral endplates.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Orthopaedic Bioengineering Research Laboratory Colorado State University Fort Collins Colorado USA.
- Preclinical Surgical Research Laboratory Colorado State University Fort Collins Colorado USA.
- Dept. of Microbiology, Immunology, & Pathology Flint Animal Cancer Center Fort Collins Colorado USA.
- restor3d, Inc. Durham North Carolina USA.
- Duke Health Raleigh North Carolina USA.
- Duke University Pratt School of Engineering Durham North Carolina USA.
ORCID-Profile: James W Johnson, Ben Gadomski
Förderung
- NIH HHS
Zitieren
APA
Johnson, J. W., Gadomski, B., Labus, K., Stewart, H., Nelson, B., Seim, H., Regan, D., von Stade, D., Kelly, C., Horne, P., Gall, K., & Easley, J. (2023). Novel 3D printed lattice structure titanium cages evaluated in an ovine model of interbody fusion. JOR SPINE, 6(3). https://doi.org/10.1002/jsp2.1268
Vancouver
Johnson JW, Gadomski B, Labus K, Stewart H, Nelson B, Seim H, et al. Novel 3D printed lattice structure titanium cages evaluated in an ovine model of interbody fusion. JOR SPINE. 2023;6(3). doi:10.1002/jsp2.1268
BibTeX
@article{Johnson2023,
author = {Johnson, James W and Gadomski, Ben and Labus, Kevin and Stewart, Holly and Nelson, Brad and Seim, Howie and Regan, Dan and von Stade, Devin and Kelly, Cambre and Horne, Phillip and Gall, Ken and Easley, Jeremiah},
title = {Novel 3D printed lattice structure titanium cages evaluated in an ovine model of interbody fusion},
journal = {JOR SPINE},
year = {2023},
volume = {6},
number = {3},
doi = {10.1002/jsp2.1268}
}
EUVIMED